AIR-150: 26 TOPS AI Inference System Intel 13th-Gen with Hailo-8
AIR-150Starting at $1,875.00
- Intel 13th-Gen Core i3/i5 up to 14 Watt with 10 Cores
- Empowered by Hailo-8 M.2 AI module up to 26 TOPS
- Compact Fanless 156 x 112 x 60mm dimensions
- Dual 4K lockable HDMI 2.0b, 4096x2160 resolution
- Vertical I/O: 3x COM/1x DIO/2x CANBus/2x LAN/4x USB
- Rich AI toolkits for runtime integration and model deployment
- Flexible expansion with 3x M.2: M key 2280, E key 2230, B key 3042
- -20~60°C wide temperature and 12-24V wide voltage support
Frequently Asked Questions
The AIR-150 provides the following I/O:
- 2x HDMI 2.0b (up to 4096x2160@60Hz, dual display)
- 2x LAN (1x 1GbE Intel i219, 1x 2.5GbE Intel i226)
- 4x USB (3x USB 3.2 Gen1, 1x USB 2.0)
- 2x RS-232/422/485 COM ports plus 1x RS-485 (COM3)
- 1x 8-bit DIO (DB9)
- 2x CANBus (2x3 pin)
- 1x Audio jack (Mic-in/Line-out)
The AIR-150 accepts a 12-24V DC input through a 2-pin Phoenix terminal connector. Power draw is typically 17.9W at OS idle, with a maximum of 45.81W under full load. It supports both ATX and AT power modes (ATX is default, selectable via jumper CN22).
The AIR-150 operates from -20°C to 60°C (with 0.7 m/s airflow) and can be stored from -40°C to 85°C. It is rated for 95% relative humidity at 40°C (non-condensing). Certifications include CE/FCC Class B, Heavy Industry EMC standards 61000-6-4 and 61000-6-2, CCC, BSMI, UL, and CB.
The system uses Dual Channel DDR5 5200 MHz SO-DIMM memory with a maximum capacity of 64GB across two slots. For storage, it supports 1x Slim SATA and 1x M.2 M-key 2280 module (SATA or PCIe x4 Gen4 NVMe).
The AIR-150 provides three M.2 expansion slots:
- M-Key 2280 for NVMe/SATA storage
- E-Key 2230 for Wi-Fi (PCIe x1, USB 2.0)
- B-Key 3042/3052 with Nano SIM support (PCIe x1, USB 3.2), which by default is bundled with the Hailo AI acceleration module (up to 26 TOPS)
It also includes an onboard TPM 2.0 module (SLB9670XQ2.0).
The AIR-150 supports Microsoft Windows 10/Windows 11 IoT (64-bit) and Ubuntu 22.04 Desktop (64-bit). Pre-installed embedded OS options are also available: Windows 10 IoT 64-bit with WISE-DeviceOn, and Ubuntu Desktop 22.04 LTS 64-bit.
The AIR-150 supports wall mounting (included by default with two wings on the bottom cover) and optional DIN-rail mounting. Dimensions are 156 x 112 x 60 mm and weight is 1.3 kg.
The AIR-150 reserves an M.2 E-Key 2230 slot for Wi-Fi and four antenna sockets (labeled ANT) for wireless/LTE antennas. The BIOS also includes WWAN configuration options to enable 4G (7360/7560 Intel) or 5G (M80 MediaTek) modems via the M.2 WWAN device slot.
The two SKUs differ only in CPU: the AIR-150-S44A1 uses an Intel Core i5-1345UE, while the AIR-150-S24A1 uses an Intel Core i3-1315UE. All other specifications, including memory, storage, I/O, and expansion, are the same across both models.
How-to Guides
- Loosen the 7 screws affixing the bottom cover and remove it.
- Install the M.2 E-Key 2230 module using a round head screw.
- Install the M.2 M-Key 2280 module using a round head screw.
- Loosen the 4 screws affixing the top cover and remove it.
- If using only one memory slot, insert the module into socket NO.2 without a thermal pad (socket NO.1 is not recommended for single-module use).
- If using both slots, use two thermal pads: attach the larger pad to the back of the first memory module (near the motherboard face) and plug it into socket NO.1.
- Attach the smaller thermal pad to the remaining memory module and install it into the remaining slot.
- Loosen the 7 screws affixing the bottom cover and remove it.
- Fasten the Slim SATA drive to the bottom cover using 4 screws.
- Insert the SATA cable into the motherboard.
- The AIR-150 supports wall mounting by default using the two wings on the bottom cover.
- Use the 4 existing flat-head screws already attached on the side cover to secure the unit to the wall.
- Confirm the optional DIN-rail mounting kit is available (not included by default).
- Use 7x 19300086506 flat-head screws (the same screws used for wall mounting) to attach the DIN-rail bracket; 3 of these screws are included in the accessory bag.
| Manufacturer | Advantech |
|---|---|
| Short Description | The AIR-150 fanless edge intelligence system is based on Intel 13th generation Core i5/i3 processors, built-in Iris Xe/UHD graphics chipsets, and added-on Hailo AI acceleration module, delivering 26 TOPS AI computing performance. With rich AI software toolkits to realize AI inferencing, AIR-150 also supports Advantech Edge AI SDK, suitable for AI-enabled applications in smart access control & security, parking lot management, and smart factories. |
| Processor | AIR-150-S44A1: Core i5-1345UE AIR-150-S24A1: Core i3-1315UE |
| Graphics | AIR-150-S44A1: Intel Iris Xe Graphics eligible AIR-150-S24A1: Intel UHD Graphics for 13th Gen Intel Processors |
| Memory | Dual Channel DDR5 5200 MHz 262 pin SO-DIMM Maximum Capacity: 64GB |
| Chipset | Integrated in CPU |
| Video Port | 2x HDMI 2.0b: 4096x2160@60Hz, Dual Display |
| Audio | 1 x Mic-in / Line-out, Realtek ALC888S HD Audio |
| DIO | DB9 8 bit, 1 port |
| M.2 | 1 x E-Key 2230 (PCIex1, USB2.0) 1 x B-Key 3042/3052 w/ Nano SIM (PCIex1, USB 3.2) *Default bundled with Hailo AI module B+M key 1 x M-Key 2280 (SATA, PCIex4) |
| Power Input Voltage | 12-24 VDC |
| Power Type | ATX/AT mode (Default ATX) |
| Fan | Fanless |
| Dimension | 156 x 112 x 60 mm |
| Weight | 1.3 kg |
| Construction | Shoebox |
| Mounting | Wall Mounting/Din-Rail |
| Operating Temperature | -20 ~ 60 °C, with 0.7m/s air flow |
| Storage Temperature | -40 ~ 85 °C (-40 ~ 185°F) |
| Humidity | 95% @ 40 °C (non-condensing) |
| Vibration | 3 Grms, IEC60068-2-64, random, 5~500 Hz, 1hr/axis (with Wall Mount) |
| Shock | 30 G, IEC-60068-2-27, half sine, 11 ms duration (with Wall Mount) |
| EMC | CE/FCC Class B, Heavy Industry 61000-6-4, 61000-6-2, CCC, BSMI |