Industrial Communications

• Two 10 GbE ports; Intel® X550-AT2 10 GigE controller
• Gen3 PCI Express x4 interface
• Supports 10GbE with CAT-6/ 6a cable (Max. 100 meters)
• Supports 10GbE 802.3at PoE+ with CAT 6a cable
• Supports NBASE-T and 1000BASE-T with CAT-5/ 5e cable
• Compliant with IEEE 802.3at to deliver 25.5W each port
• Supports 15.5 KB jumbo frame, NIC teaming and IEEE 1588
• Per-port PoE+ power on/off control via API

Due to global chip shortages, this product temporarily available only with a system sale.

Main Features 

• Four USB 3.0 host controllers
• Support 1500mA Max. Current per Port
• Supports four or eight USB 3.0 ports
• 3 Ports with Locking connector compliant with USB3 Vision V1.0 Standard-A
• Compliant with USB 3.0 Specification and Intel® xHCI Specification, Revision 1.0
• PCI Express x4 interface
• Supports Microsoft Windows 7/8.1 and Linux operating systems

Main Features:

• Five 10/100/1000 Mbps Gigabit Ethernet ports
• Supports IEEE 802.3at PoE+ PSE on port 2~5
• Up to 25.5 W power output on each port, total 80W power budget
• Dual power Input:
  • - PoE+ PD (Powered Device) mode via port 1
  • - 24/48 VDC input with power connector
• EMS level 3 protection for industrial environments
• Industrial-grade, -25°C to 70°C fanless operation
• IP50 (EDX-104J) housing

Main Features:

• Full compliance with USB V1.1 and V2.0 specifications.
• RS-232/422/485 port supported
• Transmission speed up to 921.6 kbps
• Automatic RS-485 data flow control
• Bus-powered; no need for external power supply
• Plug & Play installation
• No additional IRQs or I/O ports required
• Hot swap function supported

Main Features:

• Full compliance with USB V1.1 and V2.0 specifications.
• RS-232 port supported
• Transmission speed up to 921.6 kbps
• Bus-powered; no need for external power supply
• Plug & Play installation
• No additional IRQs or I/O ports required
• Hot swap function support

Main Features:

• PCI bus 2.2 compliant
• Supports serial speed up to 921.6 kbps, and any baud rate setting
• 8-port RS-232, or 8-port RS-422/485
• OXuPC1954 UARTs with 128-byte FIFOs standard
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 2000/XP/Vista/7, Windows CE 5.0/6.0, Linux, and QNX
• Interrupt status register for increased performance
• Space reserved for termination resistors
• Automatic RS-485 data flow control
• Powerful and easy to use utility (ICOM Tools)
• Universal PCI, supports 3.3 V or 5 V PCI bus signal
• 1,000 VDC surge protection
• 2,500 VDC isolation protection

Main Features:

• PCI bus specification 2.1 compliant
• Speeds up to 921.6 kbps
• 4-port RS-232/422/485
• 16PCI954 UARTs with 128-byte FIFOs standard
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 98/ME/2000/XP, Linux
• Interrupt status register for increased performance
• Space reserved for termination resistors
• Automatic RS-485 data flow control
• Powerful and easy to use utility (ICOM Tools)
• 2,500 VDC Surge Protection

Main Features:

• PCI bus specification 2.1 compliant
• Speeds up to 921.6 Kbps
• 4-port RS-232
• 16PCI954 UARTs with 128-byte FIFOs standard
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 98/ME/2000/XP, Linux
• Interrupt satus register for increased performance
• Space reserved for termination resistors
• Powerful and easy to use Utility (ICOM Tools)
• 2,500 VDC Surge Protection

Main Features:

• PCI bus specification 2.1 compliant
• Speeds up to 921.6 kbps
• 2-port RS-422/485 interface
• I/O address automatically assigned by PCI Plug & Play
• OS support: Windows 98/ME/2000/XP
• surge protection

Main Features

• Supports 1-port 100 Mbps multimode fi ber optics
• Supports 10 ~30 VDC power input
• Easily mounted on a DIN-rail, panel or piggyback
• Supports full/half-duplex fl ow control.
• Supports MDI/MDIX auto crossover.
• Embedded with a switch controller, supports auto-negotiation.
• Embedded with memory buffer, supports store and forward transmission.

Economical 5-port Unmanaged 10/100 Ethernet Switch with Single-Mode SC Fiber

Main Features:

• Supports full/half duplex flow control
• Supports MDI/MDI-X auto crossover
• Provides broadcast storm protection
• Embedded with a switch controller, supports auto-negotiation
• Supports +10 ~ 30 VDC voltage power input
• Provides surge (EFT) protection 3000VDC for power line
• Supports 4,000 VDC Ethernet ESD protection
• Provides flexible mounting: DIN-rail, Wall, Stack
• Supports wides temps: -10 ~ 65

• Supports full/half duplex flow control
• Supports MDI/MDI-X auto crossover
• Provides broadcast storm protection
• Embedded with a switch controller, supports auto-negotiation
• Supports +10 ~ 30 VDC voltage power input
• Provides surge (EFT) protection 3000VDC for power line
• Supports 4,000 VDC Ethernet ESD protection
• Provides flexible mounting: DIN-rail, Wall, Stack
• Supports wides temps: -40 ~ 85

Main Features:

• Supports full/half duplex flow control
• Supports MDI/MDI-X auto crossover
• Provides broadcast storm protection
• Embedded with a switch controller, supports auto-negotiation
• Supports +10~30 VDC for power input
• Provides surge protection 3,000 VDC for power line
• Provides flexible mounting: DIN-rail, Wall, Stack

Main Features

• Supports full/half duplex flow control
• Supports MDI/MDI-X auto crossover
• Provides broadcast storm protection
• Embedded with a switch controller, supports auto-negotiation
• Supports +10~30 VDC for power input
• Provides surge protection 3,000 VDC for power line
• Supports 4,000 VDC Ethernet ESD protection
• Provides flexible mounting: DIN-rail, Wall, Stack
• Supports wide operating temperature range: -40 ~ 85C

Main Features:

• Supports full/half duplex flow control
• Supports MDI/MDI-X auto crossover
• Provides broadcast storm protection
• Embedded with a switch controller, supports auto-negotiation
• Supports +10 ~ 30 VDC voltage power input
• Provides surge (EFT) protection 3000VDC for power line
• Supports 4,000 VDC Ethernet ESD protection
• Provides flexible mounting: DIN-rail, Wall, Stack

Economical 5-port Unmanaged 10/100 Ethernet Switch

Main Features:

• Supports RS-232 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM) mode
• Allows a max. of 5 hosts to access one serial port
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Supports remote update firmware

Main Features:

• Supports RS-232/422/485 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Automatic RS-485 data flow control
• Supports remote update firmware

Main Features:

• Supports RS-232 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM) mode
• Allows a max. of 5 hosts to access one serial port
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Supports remote update firmware

ADAM-4570L Datasheet

Main Features:

• Supports RS-232/422/485 serial communications
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Automatic RS-485 data flow control
• Supports remote update firmware

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you dont need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices. Compliant with USB V1.1, ADAM-4561/4562 features several powerful functions such as high-speed 115.2 kbps transmission, support for various operating systems, independentRS-232/422/485 ports and more. By simply plugging in a USB hub, ADAM-4561/4562 eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.

Main Features:

• Full compliance with USB V1.1 specifications
• Transmission speed up to 115.2 kbps
• Isolation protection 3000 VDC provided
• Automatic RS-485 data flow control
• No external power supply necessary; the hub derives its power from the USB port
• Plug & Play installation
• No additional IRQs or I/O ports required
• Hot swap function supported

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.

Main Features:

• Full compliance with USB V1.1 specifications
• RS-232/422/485 port supported
• Transmission speed up to 115.2 kbps
• Isolation protection 3000 VDC provided
• Automatic RS-485 data flow control
• No external power supply necessary; the hub derives its power from the USB port
• Plug & Play installation
• No additional IRQs or I/O ports required
• Hot swap function supported

• Easily mounted on a DIN-rail, panel or piggyback
• Transmission speeds of up to 115.2 kbps
• Half/Full-duplex, bidirectional transmission mode
• Avoids lightning strikes and EMI/RFI interference
• Prevents damage from electrostatic discharge
• Stable and error-free data transmission
• Automatic internal RS-485 bus supervision
• No external flow control signals required for RS-485
• Transient suppression and over-current protection on RS-422/485 data lines
• Reserved space for termination resistors
• LED for power and data flow indication
• Power requirement: +10 to + 30 VDC

USB-4622 is a USB 2.0 hub capable of connecting at most 5 USB salve modules. It supports the USB 2.0 high-speed mode that can achieve 480Mbps data transmitting rate, realizing the USB-4700 series' high performance for heavy-loaded applications. The unique lockable cable design secures the slave module connections, preventing the cable from being unplugged accidentally.
Main Features:

• 5 downstream USB 2.0 ports
• Compatible with USB 2.0 High-speed, USB 2.0 Full-speed, USB 1.0
• 480 Mbps high-speed data transfer
• LED indicator
• Suitable for DIN-rail mounting
• One lockable USB cable included
• 10 ~ 30 VDC power input (power adapter not included*)

With 5 USB 2.0 ports, USB-4620 enhances its isolation protection to 3,000 VDC for each downstream port, making every USB device connected with USB-4620 could operate independently and safely. Designed for industrial applications, USB-4620 is able to be mounted through several types, such as DIN-rail mounting, wall mount, and VESA mount. Other than that, USB-4620 is equipped with lockable USB connectors and screw holes, allowing each device to be connected firmly with USB-4620. Though the standard USB cable is made for easy plugging and removing, it is critical to have reliable connections while operating for automation control and online production applications.
Main Features:

• 5 downstream USB 2.0 ports
• Compatible with USB 2.0 Full-speed
• 3,000 VDC voltage isolation for each downstream port
• Suitable for DIN-rail mounting
• One lockable USB cable included
• 10 ~ 30 VDC power input (power adapter not included*)

Main Features

• Provides four external, independent USB 3.0 Ports
• Supports up to 20 Gbps total transfer bandwidth - Up to 5 Gbps per port
• UASP support across all four ports
• PCIe x4 interface compliant with PCI Express 2.0 specifications
• Optional LP4 or SATA power connector provides up to 900mA per USB port
• Supports USB Battery Charging Specification 1.2 (Apple Mode only)
• Fully compliant with USB 3.0 rev 1.0 and Intel xHCI rev 1.0 specifications
• Backward compatible with USB 2.0 and USB 1.0/1.1 devices
• Includes a Low Profile/half-height installation bracket
• Hot-swap feature to connect/disconnect devices without powering down the syste

Main Features:

• Up to 192 (96 + 96) TTL digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits for higher driving capacity than 8255
• Multiple-source interrupt handling
• Interrupt output pin for simultaneously triggering external devices with the interrupt
• Output status read-back

Main Features:

• PCI bus specification 2.1 compliant
• Speeds up to 921.6 kbps
• 8-port RS-232
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 98/ME/2000/XP, Linux
• Interrupt status register for increased performance
• Powerful and easy-to use utility (ICOM Tools)

Main Features:

• PCI bus specification 2.2
• Speeds up to 921.6 kbps
• 4-port RS-232/422/485
• 16PCI954 UARTs with 128-byte FIFOs standard
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 98/ME/2000/XP, Linux
• Interrupt status register for increased performance
• Space reserved for termination resistors
• Automatic RS-485 data flow control
• Powerful and easy to use utility (ICOM Tools)
• Universal PCI
• 2,500 VDC Surge Protection
• 2,500 VDC Isolation Protection

Main Features:

• Supports 10/100 Mbps communication speeds
• Allows up to 8 clients to access field data simultaneously
• Supports popular HMI software with Modbus/TCP driver or OPC server
• Up to 31 Independent serial ports if configured to RS-485 serial mode
• Provides auto-searching device ID Windows utility
• Surge protection for RS-485 and power line
• Automatic RS-485 data flow control
• Easy mounting on DIN-rail or panel
• Supports Modbus/ASCII, RTU Protocol to control devices