As one of the largest suppliers of industrial computers worldwide, Advantech has the experience and know-how to offer world-class industrial computers and peripherals.
Brands
Advantech
2U Rackmount Chassis for ATX/ MicroATX Motherboard with Low-Profile Rear Bracket Option
ACP-2010MBMain Features
- LED indicators and audible alarm notification for system fault detection
- ACP-2010: One 5.25" and three 3.5 shock-resistant drive bays ACP-2320: One Slim optical disk drive, two internal 3.5" drives and dual how-swap SATA HDD trays
- Various riser card options to support three full-size PCI or PCIe cards for expansion
- Supports 250W /350W single power supply
- Reusable and washable air filters
- Built-in Intelligent System Module enabling whole system fan control and remote manageability
Starting at $295.00
Advantech Quiet 4U Rackmount Chassis with Dual Hot-Swap SAS/SATA HDD Trays
ACP-4320Main Features:
- Supports either an ATX motherboard or a PICMG backplane with up to15 slots
- Support dual SAS/SATA hot-swap HDD trays
- LED indicators and alarm notification for system fault detection
- Low noise system fans
- Built-in Intelligent System Module enabling whole system fan control and remote manageability
Starting at $490.00
ACP-4340MB Rev.B w/PS8-500ATX-BB (62368
ACP-4340MB-50BMain Features
- Supports a PICMG backplane with up to 14 slots or an ATX/Micro-ATXmotherboard
- Shock-resistant disk drive bay holds four hot-swap 3.5" and 2.5" SATA disktrays, one slim optical disk drive, and one 2.5" internal drive
- Dual front USB 3.0 ports
- Front-accessible system fan without opening top cover for easy maintenance
- LED indicators and alarm notification for system fault detection
- Smart fan speed control
- Built-in Intrusion switch function
- Built-in Intelligent System Module enabling whole system fan control andremote manageability
4-Slot IO Expansion, Cortex-A8 Wireless
ADAM-3600-C2GL1A1EMain Features:
- High Performance CPU Cortex A8 600MHz
- Low Power DDR3L 256MB RAM
- Embedded Real-time Linux Kernel
- Domain Focused Onboard IO -8AI / 8DI / 4DO
- 4-Slot I/O Expansion
- High I/O Flexibility with 4-slot I/O Expansion
- Multiple wireless options for Zigbee/ Wi-Fi/ 3G/ 4G/ GPRS
- IEC61131-3&C Programming Language
- Modbus & DNP3 Protocol
- Operation Temperature -40°C ~ 70°C
Advantech 8-ch Universal Analog Input Module with Modbus
ADAM-4019+-FMain Features:
- Supports 4~20 mA
- Software configurable for mV, V, mA or Thermocouple inputs
- 16-bit resolution
- Isolation voltage 3000 VDC
- Supports Modbus/RTU Protocol
- Burn-out detection function
4-Ch AO Module w/ Modbus
ADAM-4024-B1EMain Features:
- 12-bit resolution
- Software configurable for mA or V output in individual channels
- 4 digital inputs for latch output
- 3000 VDC D/A to Logic isolation
- Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.
Advantech 16-ch Isolated Digital Input Module with Modbus
ADAM-4051-CThe ADAM-4051 is a 16-ch. Digital Input Module, built with 2500 VDC optical isolation, suitable for critical applications. Different from other modules, the ADAM-4051 accepts 10~50V input voltage to fit various digital signals, such as 12 VDC, 24 VDC, 48 VDC. Moreover, users can read the current status from the LED indications on the front panel.
Main Features- 16 digital input channels
- Digital input for dry contact or wet contact
- Input Voltage level: 10~15 Vdc
- Over voltage protection: 70 Vdc
- 2,500 Vdc optical isolation
Isolated Digital Input Module
ADAM-4052-BEThe ADAM-4052 provides eight digital input channels: six fully independent isolated channels and two isolated channels with a common ground. All have 5000 V RMS isolation to prevent ground loop effects and prevent damage from power surges on the input lines.
Main Features:
- Six fully independent isolated channels.
- Two isolated channels with common ground
- Isolation voltage: 5000 V RMS
Advantech 16-ch Isolated Digital I/O Module with Modbus
ADAM-4055-CThe ADAM-4055 offers 8-ch. isolated digital inputs and 8-ch. isolated digital outputs for critical applications. The inputs accept 10~50 V voltage, and the outputs supply 5~40 VDC open collector. Considered to be user-friendly. The ADAM-4055 is also built with LED indicator for easy status reading.
Main Features:- I/O type: 8 DO/DI
- Input Voltage level: 10~50 VDC
- Open Collector to 40 VDC
- Over voltage protection: 70 VDC
- 2,500 VDC optical isolation
8-Ch Thermocouple Input Module
ADAM-4118-CThe ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.
Main Features:
- 8 differential & independent thermocouple configuration channels
- Broader Operating Temperature Range
- Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
- Broader Power Input Range: +10~+48 VDC
- Supports filter auto-tuning or filter out 50 Hz / 60 Hz
- LED display allows to monitor the status address settings
- Online Firmware Update
RS-232 to RS-422/485 converter w/ iso.
ADAM-4520-FMain Features:
- Automatic RS-485 data flow control
- 3000 VDC isolation protection
- Surge protection RS-485 data line
- Transmission speed up to 115.2 Kbps
- Networking up to 1200 meters (4000 feet)
- Reserved space for termination resistors
- Power and data flow indicator for troubleshooting
- Power requirement: +10 to +30 VDC
- Mounts easily on a DIN-rail, panel or piggyback
Addressable RS-422/485 to RS-232 Conver
ADAM-4521-AEThe ADAM-4521 is an intelligent RS-422/485 to RS-232 converter specifically designed to connect RS-422/485 devices to an RS-232 network. RS-232 is the most common transmission standard. Although widely available on most computer systems, measurement equipment, PLCs, and industrial devices, its transmission speed, communication distance, and especially networking capability are limited due to unbalanced transmission. The ADAM-4521 addressable converter solves this problem and lets you easily build up an RS-485 network with your RS-232 devices by assigning each one an address for easier communication.
Main Features:
- Automatic RS-485 data flow control
- 1000 VDC isolation protection
- Surge protection RS-485 data line
- Transmission speed up to 115.2 Kbps
- Networking up to 1200 meters (4000 feet)
- Reserved space for termination resistors
- Power and data flow indicator for troubleshooting
- Power requirement: +10 to +30 VDC
- Mounts easily on a DIN-rail, panel or piggyback
- RS-232 and RS-485 can be set to different baud rates
- Watchdog timer function
- Software configurable to either addressable or non-addressable mode
- All communication setups stored in EEPROM
Fiber Optic to RS-232/422/485 Converter
ADAM-4542+-BE- Easily mounted on a DIN-rail, panel or piggyback
- Transmission speeds of up to 115.2 kbps
- Half/Full-duplex, bidirectional transmission mode
- Avoids lightning strikes and EMI/RFI interference
- Prevents damage from electrostatic discharge
- Stable and error-free data transmission
- Automatic internal RS-485 bus supervision
- No external flow control signals required for RS-485
- Transient suppression and over-current protection on RS-422/485 data lines
- Reserved space for termination resistors
- LED for power and data flow indication
- Power requirement: +10 to + 30 VDC
1-port Isolated USB to RS-232/422/485
ADAM-4561-CEADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.
Main Features:
- Full compliance with USB V1.1 specifications
- RS-232/422/485 port supported
- Transmission speed up to 115.2 kbps
- Isolation protection 3000 VDC provided
- Automatic RS-485 data flow control
- No external power supply necessary; the hub derives its power from the USB port
- Plug & Play installation
- No additional IRQs or I/O ports required
- Hot swap function supported
1 port isolated USB to RS232 converter
ADAM-4562-AEADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you dont need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices. Compliant with USB V1.1, ADAM-4561/4562 features several powerful functions such as high-speed 115.2 kbps transmission, support for various operating systems, independentRS-232/422/485 ports and more. By simply plugging in a USB hub, ADAM-4561/4562 eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Main Features:
- Full compliance with USB V1.1 specifications
- Transmission speed up to 115.2 kbps
- Isolation protection 3000 VDC provided
- Automatic RS-485 data flow control
- No external power supply necessary; the hub derives its power from the USB port
- Plug & Play installation
- No additional IRQs or I/O ports required
- Hot swap function supported
2-port RS-232/422/485 Serial Device Ser
ADAM-4570-CEMain Features:
- Supports RS-232/422/485 serial communications
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM), TCP and UDP operation modes
- Allows a max. of 5 hosts to access one serial port
- Allows a max. of 16 hosts to be accessed as TCP client mode
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Automatic RS-485 data flow control
- Supports remote update firmware
Learn More2-port RS-232 Serial Device Server
ADAM-4570L-DEMain Features:
- Supports RS-232 serial communication
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM) mode
- Allows a max. of 5 hosts to access one serial port
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Supports remote update firmware
1-port RS-232/422/485 Serial Device Ser
ADAM-4571-CE
Main Features:- Supports RS-232/422/485 serial communication
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM), TCP and UDP operation modes
- Allows a max. of 5 hosts to access one serial port
- Allows a max. of 16 hosts to be accessed as TCP client mode
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Automatic RS-485 data flow control
- Supports remote update firmware
1-port RS-232 Serial Device Server
ADAM-4571L-DE
Main Features:- Supports RS-232 serial communication
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM) mode
- Allows a max. of 5 hosts to access one serial port
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Supports remote update firmware
Advantech ADAM-4572 1-port Modbus Gateway
ADAM-4572-CEMain Features:
- Supports 10/100 Mbps communication speeds
- Allows up to 8 clients to access field data simultaneously
- Supports popular HMI software with Modbus/TCP driver or OPC server
- Up to 31 Independent serial ports if configured to RS-485 serial mode
- Provides auto-searching device ID Windows utility
- Surge protection for RS-485 and power line
- Automatic RS-485 data flow control
- Easy mounting on DIN-rail or panel
- Supports Modbus/ASCII, RTU Protocol to control devices
7-Ch RTD Input Module
ADAM-6015-DEMain Features:
- I/O Type: 7 RTD
- 10/100Based-T Ethernet
- Supports multi-channel/multi-range
- Pt 100/1000, Ni, Balco 500
- Wiring burn-out detect function
8-Ch AI/DO Module
ADAM-6017-DMain Features:
- 10/100 Mbps communication rate
- I/O type: 8 AI / 2 DO
- Input type: mV, V, mA
- ProvideDefault/customized web page
- Provides math. Functions: Max., Min., Avg.
8-ch Isolated Thermocouple Input Module
ADAM-6018+-DMain Features:
- I/O Type: 8 T/C & 8 DO
- 10/100Based-T Ethernet
- Supports multi-channel/multi-range
- ProvidesDefault/customized web page
- 2,500 VDC optical isolation
Ethernet-based Dual-loop PID Controller
ADAM-6022-A1EMain Features
- 2 loop PID control algorithms built in one package
- 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
- Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
- Support heating/cooling (direct/reverse) action mode
- Support loop open/close (PID disable/enable) and analog output manual control modes
- Built-in watchdog timer
18-Ch Isolated DI/O Module
ADAM-6050-DMain Features:
- 12-ch DI, 6-ch DO, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
16-Ch Isolated DI/O w/Counter Module
ADAM-6051-DMain Features:
- 12-ch DI, 2-ch DO, 2-ch counter, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
16-Ch Source Type DI/O Module
ADAM-6052-DMain Features:
- 8-ch DI, 8-ch DO, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
6 Relay Output/6 DI Module
ADAM-6060-DMain Features:
- 6-ch DI, 6-ch RL, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
6 DO/6 DI Power Relay Module
ADAM-6066-DMain Features:
- 6-ch DI, 6-ch RL, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
8-ch Isolated AI EtherNet/IP Module
ADAM-6117EI-AEMain Features:
- EtherNet/IP protocol
- High common mode voltage 200 VDC
- Isolation Protection: 2,500 VDC
- 2 x RJ-45 LAN (daisy chain)
15-ch Isolated DI/O EtherNet/IP Module
ADAM-6150EI-AE- EtherNet/IP protocol
- 8-ch digital input and 7-ch digital output (sink)
- Normal output current: 0.1 A (per channel)
- 2 x RJ-45 LAN (daisy chain)
16-ch Isolated DI EtherNet/IP Module
ADAM-6151EI-AEMain Features:
- EtherNet/IP protocol
- 16-ch digital input
- Normal output current: 0.1 A (per channel)
- 2 x RJ-45 LAN (daisy chain)