Data Acquisition and Control

Main Features:

• High Performance CPU Cortex A8 600MHz
• Low Power DDR3L 256MB RAM
• Embedded Real-time Linux Kernel
• Domain Focused Onboard IO -8AI / 8DI / 4DO
• 4-Slot I/O Expansion
• High I/O Flexibility with 4-slot I/O Expansion
• Multiple wireless options for Zigbee/ Wi-Fi/ 3G/ 4G/ GPRS
• IEC61131-3&C Programming Language
• Modbus & DNP3 Protocol
• Operation Temperature -40°C ~ 70°C

Main Features

• 6-channel 2 or 3 wires RTD Input
• Accept Pt100/1000, Balco500, Ni input signals
• Channels configurable for different types of input individually
• Wiring burned-out detectable function
• 3000 VDC A/D to logic isolation

Main Features

• 8 differential and independent configuration channels
• Broader operating temperature range
• Higher noise immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader power input range: 10 ~ 48VDC
• LED display allows to monitor the status address settings
• Supports 200 VDC high common mode voltage
• Supports unipolar and bipolar input
• Supports +/- 15 V input range
• Supports filter auto-turning or filter-out 50 Hz / 60 Hz
• Online firmware update

Analog output module receives its digital input through an RS-485 interface from the host computer. The format of the data is either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR),depending on the module

Main Features:

• 12-bit resolution
• Software configurable for mA or V output in individual channels
• 4 digital inputs for latch output
• 3000 VDC D/A to Logic isolation
• Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.

The ADAM-4052 provides eight digital input channels: six fully independent isolated channels and two isolated channels with a common ground. All have 5000 V RMS isolation to prevent ground loop effects and prevent damage from power surges on the input lines.

Main Features:

• Six fully independent isolated channels.
• Two isolated channels with common ground
• Isolation voltage: 5000 V RMS

The ADAM-4053 provides 16 digital input channels for dry contact or wet contact signals. For dry contact, effective distance from DI to contact point is up to 500 m.

Main Features:

• 16 input channels
• Watchdog Timer

Main Features:

• Sink Type: Digital Output
• Digital Output: Open collector to 40V (200 mA max. load)
• 12 Channels
• I/O Type: Sink Type Output

The ADAM Relay Output Module is a low-cost alternative to SSR modules. The ADAM Relay Output Module provides four relay channels, two of Form A and two of Form C. This module is excellent for ON/OFF control or low-power switching applications.
Main Features

• 4-channels relay, two Form A and two Form C
• Breakdown voltage: 500 VAC (50/60 Hz)
• Insulation resistance: 1000 M ohms minimum at 500 V DC

Main Features:

• Communication Interface: RS-485, Micro USB, Passive UHF RFID
• 8 differential and independent configuration channels
• Broader operating temperature range
• LED display allows to monitor the status address settings
• Higher noise immunity: 4 kV surge protection on power inputs, 4 kV EFT, and 8 kV ESD protection
• Broader power input range: 10 ~ 48VDC
• Supports 200 VDC high common mode voltage
• Supports unipolar and bipolar input
• Supports ± 15 V input range

The ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.

Main Features:

• 8 differential & independent thermocouple configuration channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10~+48 VDC
• Supports filter auto-tuning or filter out 50 Hz / 60 Hz
• LED display allows to monitor the status address settings
• Online Firmware Update

Main Features:

• Communication Interface: RS-485, Micro USB, Passive UHF RFID
• 8 Form A output channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 4 kV surge protection on power inputs, 4 kV EFT, and 8 kV ESD Protection
• Broader Power Input Range: +10 ~ +48 VDC
• LED display allows to monitor the status address settings
• DO channels support pulse output function

Main Features:

• 7 input channels and 8 output channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10 ~ +48 VDC
• LED display allows to monitor the status address settings
• Digital Filter Function
• DI channels can be used as 1 kVGz counters
• Over current/ short circuit protection
• DO channels support pulse output function

The ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.

Main Features:

• Wide Operating Temperature: -40 ~ 85 degrees C
• Automatic RS-485 data flow control
• 3000 VDC isolation protection
• Surge protection RS-485 data line
• Transmission speed up to 115.2 Kbps
• Networking up to 1200 meters (4000 feet)
• Reserved space for termination resistors
• Power and data flow indicator for troubleshooting
• Power requirement: +10 to +48 VDC
• Mounts easily on a DIN-rail, panel or piggyback

Main Features:

• Easily mounted on a DIN-rail, panel or piggyback
• Transmission speeds of up to 115.2 kbps
• Optical fibers enable transmission of 2.5 km (measured with 62.5/125 mm)
• Half/Full-duplex, bidirectional transmission mode
• Avoids lightning strikes and EMI/RFI interference
• Prevents damage from electrostatic discharge
• Stable and error-free data transmission
• Automatic internal RS-485 bus supervision
• No external flow control signals required for RS-485
• Transient suppression and over-current protection on RS-422/485 data lines
• Reserved space for termination resistors
• LED for power and data flow indication
• Power requirement: +10 to + 30 VDC

• Easily mounted on a DIN-rail, panel or piggyback
• Transmission speeds of up to 115.2 kbps
• Half/Full-duplex, bidirectional transmission mode
• Avoids lightning strikes and EMI/RFI interference
• Prevents damage from electrostatic discharge
• Stable and error-free data transmission
• Automatic internal RS-485 bus supervision
• No external flow control signals required for RS-485
• Transient suppression and over-current protection on RS-422/485 data lines
• Reserved space for termination resistors
• LED for power and data flow indication
• Power requirement: +10 to + 30 VDC

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.

Main Features:

• Full compliance with USB V1.1 specifications
• RS-232/422/485 port supported
• Transmission speed up to 115.2 kbps
• Isolation protection 3000 VDC provided
• Automatic RS-485 data flow control
• No external power supply necessary; the hub derives its power from the USB port
• Plug & Play installation
• No additional IRQs or I/O ports required
• Hot swap function supported

ADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you dont need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices. Compliant with USB V1.1, ADAM-4561/4562 features several powerful functions such as high-speed 115.2 kbps transmission, support for various operating systems, independentRS-232/422/485 ports and more. By simply plugging in a USB hub, ADAM-4561/4562 eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.

Main Features:

• Full compliance with USB V1.1 specifications
• Transmission speed up to 115.2 kbps
• Isolation protection 3000 VDC provided
• Automatic RS-485 data flow control
• No external power supply necessary; the hub derives its power from the USB port
• Plug & Play installation
• No additional IRQs or I/O ports required
• Hot swap function supported

Main Features:

• Supports RS-232/422/485 serial communications
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Automatic RS-485 data flow control
• Supports remote update firmware

Main Features:

• Supports RS-232 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM) mode
• Allows a max. of 5 hosts to access one serial port
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Supports remote update firmware

ADAM-4570L Datasheet

Main Features:

• Supports RS-232/422/485 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM), TCP and UDP operation modes
• Allows a max. of 5 hosts to access one serial port
• Allows a max. of 16 hosts to be accessed as TCP client mode
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Automatic RS-485 data flow control
• Supports remote update firmware

Main Features:

• Supports RS-232 serial communication
• Provides 10/100 Mbps auto-sensing Ethernet port
• Supports baud rate up to 921.6 kbps
• Provides COM port redirection (Virtual COM) mode
• Allows a max. of 5 hosts to access one serial port
• Supports auto re-connection function
• Supports Windows 2000/XP/Vista drivers
• Built-in 15 KV ESD protection for all serial signals
• Supports remote update firmware

Main Features:

• I/O Type: 7 RTD
• 10/100Based-T Ethernet
• Supports multi-channel/multi-range
• Pt 100/1000, Ni, Balco 500
• Wiring burn-out detect function

Main Features:

• 10/100 Mbps communication rate
• I/O type: 8 AI / 2 DO
• Input type: mV, V, mA
• ProvideDefault/customized web page
• Provides math. Functions: Max., Min., Avg.

Main Features

• 2 loop PID control algorithms built in one package
• 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
• Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
• Support heating/cooling (direct/reverse) action mode
• Support loop open/close (PID disable/enable) and analog output manual control modes
• Built-in watchdog timer

Main Features:

• 12-ch DI, 6-ch DO, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Main Features:

• 12-ch DI, 2-ch DO, 2-ch counter, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Main Features:

• 8-ch DI, 8-ch DO, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Main Features:

• 6-ch DI, 6-ch RL, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Main Features:

• 6-ch DI, 6-ch RL, Ethernet-based smart I/O
• Remote monitoring and control with mobile devices
• Group configuration capability for multiple module setup
• Flexible user-defined Modbus address
• Intelligent control ability by Peer-to-Peer and GCL function
• Active I/O message by data stream or event trigger function
• Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
• Web language support: XML, HTML 5, Java Script

Main Features:

• EtherNet/IP protocol
• High common mode voltage 200 VDC
• Isolation Protection: 2,500 VDC
• 2 x RJ-45 LAN (daisy chain)

• EtherNet/IP protocol
• 8-ch digital input and 7-ch digital output (sink)
• Normal output current: 0.1 A (per channel)
• 2 x RJ-45 LAN (daisy chain)