12.1" XGA WT Ind. Monitor w/ Resistive
FPM-3121G-R3BEStarting at $1,140.00
Main Features:
- 12.1" SVGA LED backlight LCD with low power consumption
- Robust anodized coated aluminum front bezel and stainless steel rear cover
- Supports wide operating temperatures
- Increase reliability by enhanced 5-wire resistive touch sensor
- Anti-reflective screen with tempered glass
- Full enclosure ground isolation protection
- Supports VGA/DVI input, dual touch interfaces and two power inputs
- Front lockable OSD membrane keys with user-defined brightness setting
- Energy Star certification
- Front panel is IP65 compliant
- Supports panel, VESA, wall and desktop stand mounting
Frequently Asked Questions
The FPM-3121G-R3BE uses a 12.1" XGA TFT LCD panel with a maximum resolution of 1024 x 768 and up to 16.2M colors. Luminance is 600 cd/m2 with a typical contrast ratio of 700:1. Viewing angles are 140° (V) and 160° (H). Lamp life (MTBF) is rated at 50,000 hours.
The monitor takes 24 VDC (±20%) input through a Phoenix Jack / plug-in block 3P male connector (ME050-50803), mated with an external plug-in block 3P female connector (MC211-F103). Maximum power consumption for the FPM-3121G is 15 W (±20%). Supply wiring should be rated for at least 75°C.
For the FPM-3121G LCD panel, the operating temperature range is -30 to 80°C and storage temperature range is -40 to 85°C. The safety operation temperature (system-level) is -20 to 60°C. The manual notes that the LCD-only figures should be checked against system specifications for operating and storage temperatures.
The unit provides:
- VGA port (DB-15) for analog video input
- DVI-D port for digital-only video input
- Touchscreen connector (DB-9) for RS-232 touch interface, present only if touchscreen is installed
- Touchscreen connector (USB) for USB touch interface, present only if touchscreen is installed
- Plug-in block 3P male DC 24V power connector
Note: RS-232 and USB touch interfaces can both be connected at the same time, but USB has higher priority. Switching from USB to RS-232 requires restarting the PC/workstation.
Yes, it supports a 5-wire resistive touchscreen with a combo USB & RS-232 controller. Supported operating systems for the touch driver are Windows XP, Vista, 7, 8, XPe, CE, 10, and Linux.
The FPM-3121G measures 312 x 244 x 60 mm (W x H x D) and weighs 4.07 kg. The panel cut-out dimensions for panel mounting are 303.5 x 229.5 mm (11.95" x 9.04").
The FPM-3121G-R3BE supports panel mounting, wall mounting (with the FPM-1000T-SMKE kit), desktop stand mounting, and VESA mounting. It supports both VESA 75 x 75 mm and 100 x 100 mm patterns.
The front panel is IP65 certified. The monitor complies with the BSMI, CE, FCC, CCC, and UL safety standards. It is also tested and found to comply with FCC Part 15 Class A limits.
The unit has an aluminum front panel with a hard anodized coating, and the rear cover is SECC steel. The front panel is die-cast magnesium alloy and carries IP65 certification.
How-to Guides
- Confirm the power source supplies 24 VDC (±20%).
- Use wiring rated for at least 75°C for the power connections.
- Connect the wires to the external plug-in block 3P female connector (MC211-F103 with flanges).
- Mate the female connector with the plug-in block 3P male connector (ME050-50803) on the monitor.
- Use the FPM-1000T-SMKE wall mounting kit.
- Attach the wall mounting brackets to the rear of the FPM-3121G as shown in the wall mounting diagram for FPM-3121G/3151G.
- Secure the monitor to the wall using the mounting brackets.
- Release the mounting brackets by detaching the four screws on the rear side of the unit.
- Position the monitor into the panel cut-out (303.5 x 229.5 mm for FPM-3121G).
- Fix the brackets on the top and bottom of the monitor with screws to secure it in the panel.
- Confirm your mounting arm or bracket supports VESA 75 x 75 mm or 100 x 100 mm patterns, both of which are supported by the FPM-3121G.
- Use a mounting apparatus suitable for the weight of the unit (4.07 kg) to avoid risk of injury.
- Attach the VESA bracket to the rear of the monitor per the VESA mount diagram for FPM-3121G.
| Manufacturer | Advantech |
|---|---|
| Brightness | 400+ nit |
| Resolution | 1024 x 768 |
| Screen Size | 10.1-15" |
| Operating System | Windows 7, Windows 10, Linux |
| Certification | CE, FCC Class A, BSMI, CCC, UL, Energy Star |
| Enclosure | Front panel: Aluminum with hard anodized coating Rear cover: Stainless steel chassis with ground isolation protection |
| Mounting | Panel, VESA arm, wall, or desktop with optional mounting kit |
| Display Type | XGA TFT LCD with LED backlight |
| Display Size | 12.1" |
| Max Resolution | 1024 x 768 |
| Max Colors | 16.2 M |
| Luminance | 600 |
| Viewing Angle | 160/140 |
| Backlight Lifetime | 50,000 hours |
| Contrast Ratio | 700:1 |
| Light Transmission | Above 80% |
| Type | 5-wire resistive with enhanced ITO film |
| Humidity | 90%@50 °C non-condensing |
| Operating Temperature | -20°C ~ 60°C (-4°F ~ 140°F) |
| Storage Temperature | -30°C ~ 80°C (-22°F ~ 176°F) |
| Shock | 11ms, 10G (Non Operating, Half Sine Wave) |
| Vibration Protection | 5 ~ 500 Hz, 1 Grms (Operating, Random) |
| EMC | CE, FCC Class A, BSMI, CCC, UL |
| Power Input Voltage | Phoenix Jack: 24 VDC input, DC Jack: 12 VDC input |
| Power Consumption | 13W +20% |
| OS Support | Windows XP,2000,Vista,7,8/8.1,10 , XP/7/8/10 Embedded, CE, Linux |
| Weight | 4.07 kg (8.975 lbs) |
| Dimension | 312mm x 244mm x 60.5 mm (12.28" x 9.61" x 2.38") |