15" XGA WT Ind. Monitor w/ Resistive TS
FPM-3151G-R3BEStarting at $1,435.00
Main Features:
- 15" XGA LED backlight LCD with low power consumption
- Robust anodized coated aluminum front bezel and stainless steel rear cover
- Supports wide operating temperatures
- Increase reliability by enhanced 5-wire resistive touch sensor
- Anti-reflective screen with tempered glass
- Full enclosure ground isolation protection
- Supports VGA/DVI input, dual touch interfaces and two power inputs
- Front lockable OSD membrane keys with user-defined brightness setting
- Energy Star certification
- Front panel is NEMA4/IP65 compliant
- Supports panel, VESA, wall and desktop stand mounting
Frequently Asked Questions
The FPM-3151G-R3BE uses a 15" XGA TFT LCD panel with a maximum resolution of 1024 x 768, up to 16.2 million colors, a viewing angle of 140° (V) / 160° (H), luminance of 400 cd/m2, and a typical contrast ratio of 700:1. Lamp life (MTBF) is rated at 50,000 hours.
The unit provides a VGA port (DB-15) for analog input, a DVI-D port for digital-only input, and touchscreen connectors: a DB-9 connector for RS-232 and a USB connector, both present only if the touchscreen option is installed. If both RS-232 and USB touch interfaces are connected at the same time, USB has priority; switching from USB to RS-232 requires restarting the PC.
Power is supplied via a 3-pin Plug-In Block connector (mating part MC211-F103) at 24 VDC ±20%. Maximum power consumption for the FPM-3151G is 12 W ±20%. Advantech recommends using supply wires rated for at least 75°C.
The FPM-3151G LCD panel is rated for an operating temperature of -30 to 80°C and a storage temperature of -40 to 85°C. The overall system's safe operating temperature is -20 to 60°C.
The unit's front panel is IP65 certified. Safety and EMC standards include BSMI, CE, FCC, CCC, and UL. It also complies with FCC Part 15 Class A requirements.
The 5-wire resistive touchscreen, controlled via a USB and RS-232 combo controller, supports Windows XP, Vista, 7, 8, XPe, CE, 10, and Linux.
The FPM-3151G measures 422 x 310 x 70 mm (W x H x D) and weighs 7.73 kg. The panel cut-out dimensions for panel mounting are 392 x 292 mm (15.43" x 11.49").
The monitor supports panel mounting, wall mounting, desktop stand mounting, and VESA mounting (75 x 75 mm and 100 x 100 mm patterns).
How-to Guides
- Obtain the FPM-1000T-SMKE wall mounting kit.
- Attach the wall mounting brackets to the rear of the monitor.
- Secure the monitor with the brackets to the wall following the bracket hole pattern shown in the manual's wall mounting diagram for the FPM-3121G/3151G.
- Cut a panel opening of 392 x 292 mm.
- Detach the four mounting brackets from the rear of the monitor by removing their screws.
- Insert the monitor into the panel cut-out.
- Re-attach the brackets to the top and bottom of the monitor from the rear, securing the unit against the panel.
- Confirm your mounting arm or bracket supports the VESA 75 x 75 mm or 100 x 100 mm hole pattern.
- Align the VESA mounting holes on the rear of the monitor with the mounting apparatus.
- Secure with appropriate screws.
- Use a mounting apparatus suitable for the monitor's weight to avoid injury.
- Use wiring rated for at least 75°C for the power supply connections.
- Connect the 24 VDC ±20% supply to the 3-pin Plug-In Block Male connector (ME050-50803) on the monitor.
- Mate it with the corresponding Plug-In Block Female connector (MC211-F103) from the power source.
- Verify the supply voltage is correct before powering on the unit.
| Manufacturer | Advantech |
|---|---|
| Brightness | 300-399 nit |
| Resolution | 1024 x 768 |
| Screen Size | 10.1-15" |
| Display Type | XGA TFT LCD |
| Display Size | 15" |
| Max Resolution | 1024 x 768 |
| Max Colors | 16.2M (RGB 8-bit) |
| Luminance | 350 |
| Viewing Angle | 160/140 |
| Backlight Lifetime | 50,000 Hours |
| Contrast Ratio | 700:1 |
| Light Transmission | Greater than 80% |
| Operating Temperature | -20°C ~ 60°C (-4°F ~ 140°F) |
| Storage Temperature | -30°C ~ 80°C (-22°F ~ 176°F) |
| Shock | 11ms 10G (Non Operating Half Sine Wave) |
| Weight | 7.73 kg (17.04 lbs) |
| Dimension | 422mm x 310mm x 70 mm (16.61 x 12.2 x 2.76 in) |