9U 19" SXGA Ind. Monitor w/ Resistive T
FPM-3191G-R3BEStarting at $1,800.00
Main Features:
- 19" SXGA TFT LCD with LED backlight
- Robust design with stainless steel chassis and aluminum front panel
- Anti-reflective screen with tempered glass
- OSD control pad on front panel
- Supports industrial 24 VDC power input
- Supports panel, wall, desktop, rack or VESA arm mounting
- Front panel is IP65 compliant
- Supports 9U pre-drill Rackmount mounting hole
Frequently Asked Questions
The FPM-3191G-R3BE uses a 19" SXGA TFT LCD panel with a maximum resolution of 1280 x 1024 and up to 16.7M colors. Viewing angle is 160° (vertical) / 170° (horizontal), luminance is 350 cd/m2, and contrast ratio is 1000:1 (typical). Backlight lamp life (MTBF) is rated at 50,000 hours.
The LCD panel operating temperature is -30 ~ 85°C, with a storage temperature of -30 ~ 85°C. The safety operation temperature (system-level) is -20 ~ 60°C. Note that the LCD-only figures are listed separately from overall system specifications.
The unit is powered via a 3-pin Phoenix plug-in block connector at 24 VDC ± 20%. Maximum power consumption for the FPM-3191G is 18 W ± 20%. Wires used for the power connection should be rated for at least 75°C.
The unit provides the following connectors:
- VGA Port (DB-15) for analog video input
- DVI-D port for digital-only video input
- Touchscreen Connector (DB-9), used with the RS-232 touch interface (present only if touchscreen is installed)
- Touchscreen Connector (USB), used with the USB touch interface (present only if touchscreen is installed)
If both RS-232 and USB touch interfaces are connected at the same time, USB has priority. Switching from USB to RS-232 requires restarting the connected PC.
The unit carries BSMI, CE, FCC, CCC, and UL safety certifications. The front panel is also IP65 certified.
The touchscreen (5-wire resistive type, USB & RS-232 combo controller) supports Windows XP, Vista, 7, 8, XPe, CE, 10, and Linux.
The FPM-3191G measures 482 x 399.2 x 67 mm (W x H x D) and weighs 10.65 kg. Panel cut-out dimensions for panel mounting are 441 x 376.4 mm (17.36" x 14.81").
The FPM-3191G-R3BE supports panel, wall, desktop, and VESA mounting. It also supports 19" rack mounting, along with the FPM-3171G, using four screw holes on each side of the panel. VESA mount support is 75 x 75 mm and 100 x 100 mm.
The monitor has an aluminum front panel with a hard anodized coating, and the rear cover is SECC steel with a die-cast magnesium alloy front. The front panel carries IP65 certification.
How-to Guides
- Use the wall mounting brackets designed for the FPM-3171G/3191G.
- If different mounting is required, release the mounting brackets by detaching the four screws on the rear side.
- Attach the wall brackets directly to the wall as shown in the wall mounting diagram for the FPM-3171G/3191G.
- Release the mounting brackets by detaching the four screws on the rear side of the unit.
- Fix the brackets on the top and bottom sides using screws.
- Install the unit into a panel cut-out of 441 x 376.4 mm (17.36" x 14.81") for the FPM-3191G.
- Confirm your mounting arm or bracket supports VESA 75 x 75 mm or 100 x 100 mm hole patterns.
- Attach the VESA bracket to the rear of the FPM-3191G using the VESA mount points.
- Use a suitable mounting apparatus to avoid risk of injury during installation.
- Confirm the target enclosure is an industrial-standard 19" rack.
- Locate the four screw holes on each side of the panel.
- Secure the FPM-3191G directly into the rack using these screw holes.
- Use the 3-pin Phoenix plug-in block connector (ME050-50803) supplied with the unit.
- Connect it to the mating external plug-in block 3P with flanges Female MC211-F103 connector.
- Supply 24 VDC ± 20% to the connector, using wiring rated for at least 75°C.
| Manufacturer | Advantech |
|---|---|
| Brightness | 300-399 nit |
| Resolution | 1280 x 1024 |
| Screen Size | 15.1-19" |
| Display Type | SXGA TFT LCD with LED backlight |
| Display Size | 19" |
| Max Resolution | 1280x1024 |
| Max Colors | 16.7M |
| Luminance | 350 |
| Viewing Angle | 170/160 |
| Backlight Lifetime | 50, 000 hrs |
| Contrast Ratio | 1000:1 |
| Operating Temperature | -20°C ~ 60°C (-4°F ~ 140°F) |
| Storage Temperature | -30°C ~ 80°C (-22°F ~ 176°F) |
| EMC | BSMI, CCC, CE, FCC Class A, UL |
| Power Input Voltage | 12v & 24v |
| Weight | 10.65kg |
| Dimension | 482mm x 399mm x 67 mm (18.98" x 15.71" x 2.64") |