Nuvo-10109GC: Industrial Edge AI Computer Supporting Single 600W Blackwell GPU, Intel 14/13/12th-Gen Core CPU with Three Additional PCIe Slots
Nuvo-10109GC SeriesStarting at $2,310.00
The Nuvo-10109GC is CoastIPC's next major enhancement to the edge AI platform. Designed for NVIDIA’s latest 600W Blackwell GPU, it delivers up to 4000 AI TOPS for FP4 LLM inference and generative AI, or 125 TFLOPS for autonomous driving and AI-based computer vision applications.
- Supports single 600W Blackwell GPU with Gen4 x16 signal and dedicated GPU-locking bracket
- Intel 14/13/12th-Gen Core 35/65W LGA1700 CPU
- Up to 128GB ECC/ non-ECC DDR5 4800 with Intel R680E chipset (2x SODIMM)
- Three x8 PCIe slots with Gen3 x4 signal for add-on cards
- 6x USB 3.2, 2x 2.5GbE, 1x GbE, and 1x optional 10GbE
- Two front-accessible storage options: 1x 2.5" SATA tray and 1x optional NVMe tray
- 9V to 32V wide-range DC input with ignition power control
- Rugged, -25°C to 60°C operation
Frequently Asked Questions
The system provides:
- 6x USB 3.2 Gen2x1 (10 Gbps) ports
- 1x USB 2.0 port (internal, for dongle use)
- 2x 2.5GbE ports (Intel I226-IT) and 1x Gigabit Ethernet port (Intel I219-LM)
- 1x optional 10GBASE-T port (Marvell AQC113CS, supports NBASE-T 5G/2.5G and 1000BASE-T)
- 1x VGA connector (up to 1920 x 1200)
- 1x DisplayPort connector (up to 4096 x 2304)
- 2x software-programmable RS-232/422/485 serial ports (COM1/COM2)
- 1x 3.5 mm audio jack for mic-in and speaker-out
The system accepts 9V to 32V wide-range DC input through a 3-pin pluggable terminal block, and supports ignition power control. This wide input range allows direct use with 12V and 24V automotive power sources.
With a 35W CPU and NVIDIA 600W GPU, the system operates from -25°C to 60°C. With a 65W CPU and 600W GPU, it operates from -25°C to 60°C with the optional fan kit, or -25°C to 50°C without the fan kit. A wide temperature HDD or SSD is required for sub-zero operation, and the fan kit is recommended for 65W CPUs above 50°C ambient.
Storage temperature is -40°C to 85°C, humidity tolerance is 10% to 90% non-condensing. The system meets MIL-STD-810H Method 514.8 Category 4 vibration (with damping bracket) and Method 516.8 Procedure I shock, and CE/FCC Class A EMC compliance per EN 55032 & EN 55035.
The Nuvo-10109GC supports up to 128GB ECC/non-ECC DDR5 4800 SDRAM using up to 2x 64GB SODIMM modules with the Intel R680E chipset.
For storage, it offers one front-accessible, hot-swappable 2.5" SATA HDD/SSD tray, plus an optional M.2 2280 M key socket (PCIe Gen4 x4) or an optional front-accessible M.2 2280 M key tray (PCIe Gen4 x4) for NVMe SSDs.
The system supports a single 600W GPU via a PCIe x16 slot running at Gen4, 16-lane signal, with a slot width of 70 mm. A dedicated PCIe GPU-locking bracket is included for the RTX Pro 6000 and selected GPU cards, along with a GPU bracket kit accessory for further support (contact Neousys for details on compatible cards).
In addition to the PCIe x16 GPU slot, the system provides three PCIe x8 slots running at Gen3 x4 signal for add-on cards, two full-size mini PCI Express sockets with internal SIM sockets, and one M.2 2242/3042 B key socket with an internal SIM socket.
The system measures 224 mm (W) x 400 mm (D) x 196 mm (H), without the damping bracket, and weighs 7.1 kg. It is designed for wall-mounting with damping brackets.
The system supports Intel 14th, 13th, and 12th-Gen Core processors in the LGA1700 socket, with 35W or 65W TDP options, including models ranging from Celeron G6900E/G6900TE up to Core i9-14900/i9-14900T. It uses the Intel R680E Platform Controller Hub chipset and has integrated Intel UHD Graphics 770 (32EU) or 730 (24EU).
How-to Guides
- Locate the 3-pin pluggable terminal block on the rear I/O panel, labeled for 9V to 32V DC input and ignition GND.
- Connect a DC power source within the 9V to 32V range to the terminal block.
- If using ignition power control, wire the ignition input according to the terminal block labeling.
- Attach the damping brackets to the chassis as provided for wall-mount installation.
- Secure the unit to the wall using the damping bracket mounting points.
- Note that overall dimensions are 224 mm (W) x 400 mm (D) x 196 mm (H) without the damping bracket, and the unit weighs 7.1 kg.
- Locate the front-accessible, hot-swappable HDD tray on the front panel.
- Remove the tray from the chassis.
- Install a 2.5" HDD or SSD into the tray.
- Re-insert the tray into the front panel; the tray supports hot-swapping.
The Nuvo-10109GC is CoastIPC's next major enhancement to the edge AI platform. Designed for NVIDIA’s latest 600W Blackwell GPU, it delivers up to 4000 AI TOPS for FP4 LLM inference and generative AI, or 125 TFLOPS for autonomous driving and AI-based computer vision applications.
To support a 600W Blackwell GPU across diverse installation environments, Nuvo-10109GC incorporates a new power design that delivers ample power capacity and enhanced transient response, meeting the demanding power requirements of both the system and the GPU. More importantly, it maintains full-rated power output across a wide 9V to 32V DC input range, enabling direct compatibility with 12V and 24V automotive power sources and ensuring stable operation under voltage fluctuations.
Nuvo-10109GC also offers versatile I/O connectivity, including 10G and 1G Ethernet ports for data communication, and a front-accessible 2.5" SATA SSD tray, an optional M.2 2280 Gen4x4 NVMe slot for high-speed storage—ideal for sensor data logging or VIL/HIL testing applications. Additionally, it provides three Gen3x4 PCIe slots beyond the GPU installation slot, enabling system integrators to build all-in-one systems by incorporating other functional modules, such as GMSL2 frame grabbers, automotive Ethernet adapters, or high-end camera frame grabbers.
Mechanically, Nuvo-10109GC features a reinforced chassis with an improved GPU retention bracket and damping bracket to ensure structural reliability and long-term durability under vibration and shock. Combined with its electrical robustness for a 600W GPU and multiple expansion slots, Nuvo-10109GC marks a new milestone in edge AI platforms, delivering exceptional AI performance for ever-evolving AI applications in both stationary and mobile environments.
| Manufacturer | Neousys |
|---|---|
| Short Description | The Nuvo-10109GC is CoastIPC's next major enhancement to the edge AI platform. Designed for NVIDIA’s latest 600W Blackwell GPU, it delivers up to 4000 AI TOPS for FP4 LLM inference and generative AI, or 125 TFLOPS for autonomous driving and AI-based computer vision applications. |