Nuvo 8034: Neousys Rugged Embedded Computer with 7 PCIe/PCI Slots
Nuvo-8034 SeriesStarting at $1,545.00
Main Features:
- Supports 9th/8th Gen core i7/i5/i3 LGA 1151 CPU
- Two x16 PCIe, two x8 PCIe, and three PCI slots
- Supports single NVIDIA GPU card with up top 180W TDP
- 8-CH isolated DI and 8-CH isolated DO
- 2x GbE ports with screw-lock
- 4x USB 3.1 Gen2 and 4x USB 3.1 Gen1 ports with screw-lock
- Two front accessible, hot-swappable 2.5" SATA HDD/SDD with RAID 0/1
- M.2 2280 M key NVMe (Gen3 x4) for fast storage access
Frequently Asked Questions
The Nuvo-8034 supports Intel® 9th/8th-Gen Core™ i7/i5/i3 LGA1151 processors as well as Intel® Xeon® E processors (E-2176G, E-2124G, E-2278GE, E-2278GEL), paired with an Intel® C246 platform controller hub chipset.
The system provides 7 expansion slots: two PCIe x16 slots (@Gen3, 8-lanes) connected directly to the CPU PEG port, two PCIe x8 slots (@Gen3, 4-lanes) from the PCH, and three 33MHz/32-bit 5V PCI slots for legacy cards.
Yes. The system can accommodate a single NVIDIA® GPU card with up to 180W TDP, using one of the x16 PEG-connected PCIe slots.
The Nuvo-8034 accepts 8 to 35V DC input through a 3-pin pluggable terminal block. A separate 3-pin pluggable terminal block is provided for remote control.
The system operates from -25°C to 60°C with 100% CPU/GPU loading. Storage temperature range is -40°C to 85°C. Note: for i7-9700E and i7-8700 running at 65W mode, the highest operating temperature is limited to 50°C, and thermal throttling may occur under sustained full loading unless CPU power is reconfigured in BIOS. For sub-zero operation, a wide-temperature HDD or SSD is required.
The system has two front-accessible, hot-swappable 2.5" SATA HDD/SSD trays supporting RAID 0/1, one M.2 2280 M-key socket (PCIe Gen3 x4) for NVMe SSD or Intel® Optane™ memory, and two full-size mSATA ports (mux with mini-PCIe).
The system supports up to 128 GB of ECC/non-ECC DDR4 2133 SDRAM across four SODIMM slots.
The Nuvo-8034 includes 2x Gigabit Ethernet ports with screw-lock (Intel® I219-LM and I210-IT), 1x VGA, 1x DVI-D, 1x DisplayPort, 2x software-programmable RS-232/422/485 ports (COM1/COM2), optional 2x RS-232 ports (COM3/COM4), 4x USB 3.1 Gen2 and 4x USB 3.1 Gen1 ports with screw-lock, 1x internal USB 2.0 port, 8-channel isolated DI and 8-channel isolated DO, and a 3.5mm audio jack for mic-in/speaker-out.
Yes. It has 1x M.2 2242 B-key socket supporting dual SIM mode for M.2 LTE modules, and 2x full-size mini PCI Express sockets with internal SIM sockets (muxed with mSATA).
The Nuvo-8034 measures 259mm(W) x 280mm(D) x 198mm(H), weighs 7kg, and is designed for wall-mount installation.
The system is rated CE/FCC Class A according to EN 55032 & EN 55024. It has been tested for vibration per MIL-STD-810G Method 514.6 Category 4, and shock per MIL-STD-810G Method 516.6 Procedure I, Table 516.6-II. Operating humidity range is 10%~90% non-condensing.
How-to Guides
- Locate the two front-accessible, hot-swappable 2.5" HDD/SSD trays on the front panel of the Nuvo-8034.
- Remove a tray from the chassis.
- Mount the 2.5" SATA HDD or SSD into the tray.
- Reinsert the tray into the chassis; drives can be hot-swapped and configured for RAID 0/1.
- Locate the M.2 2280 M-key socket (PCIe Gen3 x4) inside the Nuvo-8034 chassis.
- Insert a compatible M.2 2280 NVMe SSD or Intel® Optane™ memory module into the socket.
- Secure the module according to the chassis mounting point for the M.2 slot.
- Locate the 3-pin pluggable terminal block labeled for 8 to 35V DC input on the rear panel.
- Connect a DC power source within the 8 to 35V range to the terminal block, observing correct polarity.
- Optionally, connect the separate 3-pin pluggable terminal block for remote control functions.
- For AC power sources, use an optional power adapter such as the PA-160W-OW, PA-280W-ET2, or PA-480W-DIN.
- Confirm the unit's dimensions (259mm(W) x 280mm(D) x 198mm(H)) and weight (7kg) fit the intended installation location.
- Use the wall-mount configuration supported by the chassis to secure the unit in place.
| Manufacturer | Neousys |
|---|---|
| Processor | Intel Xeon E and 9th/8th Gen |
| Graphics | GPU Option or Intel UHD graphics 630 |
| Memory | Up to 128GB DDR4 2133/2400 SDRAM 4x slots |
| Chipset | Intel C246 Platform Controller Hub |
| PoE | Expansion Card Option |
| Ethernet Standard | Intel I219-LM, I210-IT |
| Video Port | 1 VGA, 1 DVI-D, 1 DisplayPort |
| Audio | 1x Speaker-out |
| DIO | 8-CH isolated DI, 8-CH isolated DO |
| PCI Express | 2 PCIe x16 slot Gen3, 8 lanes, 2 PCIe x8 slots@Gen3, 4 lanes, 3 PCI slots 33MHz/32bit 5V |
| M.2 | 2280 M key storage, 2242 B key expansion socket with SIM |
| Mini PCI-E | 1 Full Size with SIM (mux mSATA) |
| SATA HDD | 2 Hot Swap 2.5" |
| mSATA | 2x Full Size mSATA (muc mPCIe) |
| 2.5" Drive | 2 Hot Swap |
| DC Input | 1x 3-pin pluggable terminal block for 12V DC input |
| Power Adapter | 160W/280W, recommended with GPU 480W |
| Power Input Voltage | 8-35VDC |
| Power Type | DC |
| Remote Ctrl. & Status Output | 3 pin plug |
| Dimension | 259mm(w) x 280mm (D) x 198mm(H) |
| Weight | 14 |
| Mounting | Wall Mount |
| Operating Temperature | -25 C ~ 60 C (see data sheet limitations) |
| Storage Temperature | -40 C ~ 85 C |
| Humidity | 10%~90%; non-condensing |
| Vibration | Operating MIL-STD-810G, Method 514.6, Procedure 1, Table 516.6-II |
| Shock | Operating, 50 Grms, Half-sine 11 ms Duration(w/ SSD, w/o add-on card, according to IEC60068-2-27) |
| EMC | CE/FCC Class A; according to EN 55022 & EN 55024 |
| Ultracapacitor Configuration | internal or external options |
| CPU Cores | 4, 6, 8 |
| CPU Family | Intel Core, Intel Xeon |
| Base CPU Speed | 2.1 to 3.0 GHz, 3.1 to 3.5 GHz, Over 3.5 GHz |
| Video Output | Display Port, DVI-D, VGA |
| LAN Ports | 1-4 |
| Serial Ports | 3-4 |
| USB 2.0 | 1-2 |
| USB 3.0 | 3-4 |
| USB 3.1 | 1-4 |
| Max Memory | 128 GB |
| Operating System | Windows 10, Linux |
| Effective Memory Speed | 2400 MHz |
| Form Factor | Shoebox |
| Native Storage Type | 2.5" SSD, mSATA Full, M.2 NVMe SSD |
| On/Ignition | Remote On/Off |
