PCE-4132 Half Size SHB with 10th Gen Intel Core CPU

PCE-4132G2-00A1
$710.00
  • Complies with PICMG 1.3
  • Support Intel Xeon W Family series, Core i9/i7/i5/i3 LGA 1200 processors with W480E
  • Dual channel (Non-ECC) DDR4-2666/2933 up to 64GB
  • Supports USB 3.2, SATA III, PCIe 3.0 SW RAID 0,1,5,10
  • Supports triple displays: VGA+DVI-D (optional) + DP (optional)
  • Supports Advantech TPM module (optional)
  • Supports WISE-DeviceOn and embedded software APIs
PDF Document - Data Sheet PCE-4132
Data Sheet PCE-4132
(Size: 992.1 KB)

System Configuration


* Selection required

Your Configuration
PCE-4132 Half Size SHB with 10th Gen Intel Core CPU
PCE-4132 Half Size SHB with 10th Gen Intel Core CPU

In stock

$710.00

Due to the rapid rise in memory and storage cost, this price may not be accurate. If we can not honor the price, we will call/email regarding the difference. You will have the option to cancel the order with a full refund. You may also call or email us to confirm price accuracy before your purchase. This condition is temporary until the market returns to stability.


Free Shipping Over $500

Don't see the exact configuration?

Contact us, chat with us, call 866-412-6278, or view shipping information.

Custom Build

Due to the rapidly rising cost of memory and drive components, please contact us for a quote.

Contact Us

Due to the rapid rise in memory and storage cost, this price may not be accurate. If we can not honor the price, we will call/email regarding the difference. You will have the option to cancel the order with a full refund. You may also call or email us to confirm price accuracy before your purchase. This condition is temporary until the market returns to stability.


Free Shipping Over $500

Don't see the exact configuration?

Contact us, chat with us, call 866-412-6278, or view shipping information.

Frequently Asked Questions

What CPUs and chipset does the PCE-4132G2-00A1 support?

The board is a PICMG 1.3 half-size SHB that supports 10th Gen Intel Xeon W and Core i9/i7/i5/i3 LGA1200 processors (e.g., Xeon W-1290E/TE, W-1270E/TE, W-1250E/TE, and Core i9-10900E/TE, i7-10700E/TE, i5-10500E/TE, i3-10100E/TE), paired with the Intel W480E chipset.

How much RAM can the board support and what memory type is used?

The board has two DDR4 260-pin SO-DIMM sockets supporting dual-channel DDR4 2666/2933 MHz memory (ECC or non-ECC, depending on the processor). Maximum capacity is 64 GB total (32 GB per DIMM).

What display outputs are available and what resolutions do they support?

The board supports triple independent displays: VGA (up to 2048 x 1152 @ 60Hz), DVI-D (up to 1920 x 1200 @ 60Hz, optional via cable P/N 1700021831-01), and DisplayPort (up to 4096 x 2160 @ 60Hz, optional via PCE-SA01-00A1E extension module).

What storage interfaces does the board provide?

The board provides 4 SATA 3.0 ports (600 MB/sec) with support for software RAID 0, 1, 5, and 10.

What USB and serial ports are available?

The board provides rear I/O with 2 USB 3.2 ports and 1 USB 2.0 port. Internally, it supports up to 6 USB 2.0 ports (4 pin headers + 1 Type-A) and 4 USB 3.0 ports (pin header), plus 2 RS-232 COM ports (expandable to 4 RS-422/485 or 4 RS-232 with optional PCA-COM485-00A1E or PCA-COM232-00A1E modules).

What networking options does the PCE-4132G2-00A1 have?

The board has two 10/100/1000 Mbps Gigabit Ethernet ports, each using an Intel i210AT controller, with RJ45 connectors and LEDs.

What is the power requirement for this board?

The board requires +V12, +V5_SB, +V3.3, and +V5 rails, drawing 4.36A on +V12, 0.17A on +V5_SB, 1.8A on +V3.3, and 2.13A on +V5 (based on test conditions with an Intel Core i7-10700E CPU and 4GB SO-DDR4-2666 x2).

What is the operating temperature range of the board?

The operating temperature is 0 ~ 60 °C (32~140 °F), depending on CPU frequency and cooler solution. Non-operating temperature/humidity range is -40 ~ 85 °C and 60 °C @ 95% RH non-condensing. Operating humidity is rated up to 40 °C @ 85% RH non-condensing. Note that 65W CPUs are supported under 60°C board-level temperature, while 80W/95W CPUs require room-temperature operation.

What are the physical dimensions of the board?

The board measures 172.64 mm x 126.39 mm (L x H) and is a half-size SHB designed for PICMG 1.3 slot SBC & passive backplanes.

Does the board support TPM or audio expansion?

Yes. The board supports an optional Advantech TPM module (PCA-TPM-00B1E). It also has an Intel High Definition audio interface, which requires an optional audio extension module (PCA-AUDIO-HDB1E) with Realtek ACL892.

How-to Guides

Install DDR4 SO-DIMM Memory
  1. Locate the two DDR4 260-pin SO-DIMM sockets (DIMMA1 and DIMMB1) on the board.
  2. Insert memory modules rated for dual-channel DDR4 2666/2933 MHz (ECC or non-ECC, depending on processor support).
  3. Ensure total installed memory does not exceed the maximum capacity of 64 GB (32 GB per DIMM).
Connect SATA Storage Devices
  1. Use the included Serial ATA HDD data cable (P/N 1700003194) to connect a SATA drive.
  2. Connect the cable to one of the 4 available SATA 3.0 ports (600 MB/sec) on the board.
  3. Configure software RAID (0, 1, 5, or 10) in BIOS if multiple drives are used.
Enable Triple Display Output
  1. Connect a display to the onboard VGA connector (supports up to 2048 x 1152 @ 60Hz).
  2. For DisplayPort output (up to 4096 x 2160 @ 60Hz), install the optional PCE-SA01-00A1E IO extension module.
  3. For DVI-D output (up to 1920 x 1200 @ 60Hz), use the optional DP to DVI-D cable (P/N 1700021831-01).
  4. Note: PCE-SA01-00A1E is compatible with IPC-3026/IPC-6806S/ACP-4020, but not with IPC-3012.
Connect Serial (COM) Devices
  1. Use the included 2-port COM cable (P/N 1700008762) to access the onboard 2 RS-232 COM ports.
  2. To add 4 additional RS-422/485 ports, install the optional PCA-COM485-00A1E module.
  3. To add 4 additional RS-232 ports, install the optional PCA-COM232-00A1E module.
  4. If using the RS-422/485 module, set BIOS auto-flow control to disable.
Specifications
ManufacturerAdvantech
Short Description
  • Complies with PICMG 1.3
  • Support Intel Xeon W Family series, Core i9/i7/i5/i3 LGA 1200 processors with W480E
  • Dual channel (Non-ECC) DDR4-2666/2933 up to 64GB
  • Supports USB 3.2, SATA III, PCIe 3.0 SW RAID 0,1,5,10
  • Supports triple displays: VGA+DVI-D (optional) + DP (optional)
  • Supports Advantech TPM module (optional)
  • Supports WISE-DeviceOn and embedded software APIs
CPU FamilyIntel Celeron, Intel Core, Intel Pentium
Base CPU SpeedUnder 2.0 Ghz, 2.1 to 3.0 GHz, 3.1 to 3.5 GHz, Over 3.5 GHz
Video OutputDisplay Port, DVI-D, VGA
LAN Ports1-4
Serial Ports1-2
USB 2.01-2
USB 3.21 - 4
Max Memory64 GB
Operating SystemWindows 10, Linux
Effective Memory Speed2666 MHz
PDF Document - Data Sheet PCE-4132
Data Sheet PCE-4132
(Size: 992.1 KB)

Save & Share

We'll send you a unique link that you can share with others or use it to restore your product configuration in the future.

Save & Share

Please choose at least one option
We'll send you a unique link that you can share with others or use it to restore your cart in the future.
We've saved your cart. Check your email for a unique link to your saved cart.
Something went wrong while saving your cart. Please contact us for assistance.