PCIe-PoE572: Wide-Temperature 2-Port 10GBASE-T Network Adapter with IEEE 802.3bt PoE++ supporting RDMA (RoCEv2), -25°C ~ 70°C with Airflow
PCIe-PoE572bt SeriesStarting at $590.00
- Two 10GBASE-T with RDMA over Converged Ethernet (RoCEv2) by Broadcom 57416 controller
- Compliant with IEEE 802.3bt PoE++ to deliver 90W each port (total 180W)
- Rugged, -25°C to 70°C operation
- Single-slot low-profile/ standard-height PCIe card form factor
- Gen3 x4 PCIe interface
- Per-port PoE++ power on/off control via API
- Supports 10GbE with CAT 6a cable (Max. 100 meters)
- Supports up to 9.6KB Jumbo frames
Frequently Asked Questions
The PCIe-PoE572bt has two 10GBASE-T ports powered by the Broadcom 57416 controller. Each port supports 10GBASE-T (IEEE 802.3an) and 1000BASE-T (IEEE 802.3ab), with link speeds of 10G, 1G, 100M, or 10M. Each port also supports IEEE 802.3bt PoE++ output, delivering up to 90W per port (180W total).
The PCIe-PoE572bt is compliant with IEEE 802.3bt PoE++ Type 3/Type 4 PSE, delivering up to 90W on a single port. It is also backward compatible with 802.3at (PoE+) and 802.3af (PoE) powered devices. Power can be sourced in two configurations: Configuration A draws 66W from the PCIe connector, and Configuration B draws 180W from a 6-pin power connector. Per-port PoE++ power on/off control is available via API. The PCIe-N572 variant does not support PoE (listed as N/A).
The PCIe-PoE572bt operates from -25°C to 70°C rugged operation with airflow. The PCIe-N572 variant operates from -25°C to 70°C fanless operation with airflow. To ensure 100% performance at 70°C ambient, 1.2 m/s airflow must be maintained at the heatsink center.
The PCIe-PoE572bt uses a Gen3 x4 PCI Express bus interface. Both the PCIe-PoE572bt and PCIe-N572 support x8, x4, and x1 PCIe lane widths.
Yes. The card supports RDMA over Converged Ethernet (RoCEv2), with verified throughput over 9.62 Gbps (via IB test). RDMA enables direct, zero-copy data transfer to the host PC's memory, bypassing the CPU and operating system, which reduces CPU usage by up to 90% compared to TCP/UDP protocols.
The PCIe-PoE572bt requires CAT 6a or better Ethernet cable, with a maximum run length of 100 meters. It supports jumbo frames up to 9.6 KB.
The PCIe-PoE572bt is a single-slot PCIe card available in low-profile or standard-height bracket form. The low-profile bracket measures 167.65 mm (W) x 68.9 mm (H). The standard-height bracket measures 167.65 mm (W) x 111.2 mm (H). A low-profile bracket kit is available as an optional accessory.
The PCIe-PoE572bt is CE/FCC Class B certified, according to EN 55032 & EN 55035.
The PCIe-PoE572bt supports IEEE 802.3bt PoE++ power delivery of up to 90W per port (180W total), while the PCIe-N572 is a non-PoE version with no PoE power output (listed as N/A). The PCIe-PoE572bt is rugged and rated for -25°C to 70°C with airflow, while the PCIe-N572 is rated for -25°C to 70°C fanless operation with airflow. Both share the same 10GbE RDMA capabilities, bus interface, and cabling requirements.
The PCIe-PoE572bt is a rugged, wide-temperature dual-port 10G network adapter with Remote Direct Memory Access (RDMA) and IEEE 802.3bt PoE++ support. Powered by the Broadcom BCM57416 Ethernet controller, it supports jumbo frames up to 9.6 KB, making it ideal for applications such as RDMA-enabled cameras and outdoor Wi-Fi access points (APs).
As demand for 10 GigE industrial cameras grows in machine vision, traditional systems often suffer from high CPU usage due to packet handling and error checking. The PCIe-PoE572bt addresses this challenge with RDMA technology, reducing CPU usage by up to 90% compared to TCP/UDP protocols. RDMA enables direct, zero-copy data transfer to the host PC’s memory, bypassing the CPU and operating system to free up computing resources for critical tasks like image processing algorithms.
The adapter also supports IEEE 802.3bt PoE++, providing up to 90W per port to power high-consumption PoE devices. Its -25 to 70°C wide operating temperature range ensures reliable performance in harsh environments, making it an excellent choice for powering PTZ cameras and outdoor Wi-Fi APs that frequently require more than 30W and are exposed to outdoor conditions.
For enhanced flexibility, the PCIe-PoE572bt comes in a low-profile form factor, with a non-PoE version (PCIe-N572) available for applications not requiring PoE. As the first wide-temperature 10GbE RDMA frame grabber card with PoE++ support, the PCIe-PoE572bt delivers unparalleled performance and efficiency for machine vision, outdoor surveillance, and Wi-Fi infrastructure.
| Manufacturer | Neousys |
|---|---|
| Short Description | The PCIe-PoE572bt is a rugged, wide-temperature dual-port 10G network adapter with Remote Direct Memory Access (RDMA) and IEEE 802.3bt PoE++ support. Powered by the Broadcom BCM57416 Ethernet controller, it supports jumbo frames up to 9.6 KB, making it ideal for applications such as RDMA-enabled cameras and outdoor Wi-Fi access points (APs). |
| PoE | PCIe-N572 N/A PCIe-PoE572bt Compliant with IEEE 802.3bt PoE++ Type 3/Type 4 PSE, with a maximum output of 90W on a single port. |
| Dimension | Low-Profile bracket: 167.65 mm (W) x 68.9 mm (H) Standard-Height bracket: 167.65 mm (W) x 111.2 mm (H) |
| Operating Temperature | -25°C to 70°C rugged operation with airflow |
| EMC | CE/FCC Class B, according to EN 55032 & EN 55035 |
| Bus Interface | x4, Gen3 PCI Express* *Ensure 70°C ambient and 1.2 m/s airflow at the heatsink center to ensure 100% performance. *PCIe-PoE572bt/PCIe-N572 supports x8, x4, x1 PCIe lanes |
| Network Interfacce | IEEE 802.3 Ethernet interface for 10GBASE-T (IEEE 802.3an) and 1000BASE-T (IEEE 802.3ab) |