Data Acquisition and Control

Main Features:

• Wide Operating Temperature: -40 ~ 85 degrees C
• Automatic RS-485 data flow control
• 3000 VDC isolation protection
• Surge protection RS-485 data line
• Transmission speed up to 115.2 Kbps
• Networking up to 1200 meters (4000 feet)
• Reserved space for termination resistors
• Power and data flow indicator for troubleshooting
• Power requirement: +10 to +48 VDC
• Mounts easily on a DIN-rail, panel or piggyback

The ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.

Main Features:

• 8 differential & independent thermocouple configuration channels
• Broader Operating Temperature Range
• Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
• Broader Power Input Range: +10~+48 VDC
• Supports filter auto-tuning or filter out 50 Hz / 60 Hz
• LED display allows to monitor the status address settings
• Online Firmware Update

The ADAM Relay Output Module is a low-cost alternative to SSR modules. The ADAM Relay Output Module provides four relay channels, two of Form A and two of Form C. This module is excellent for ON/OFF control or low-power switching applications.
Main Features

• 4-channels relay, two Form A and two Form C
• Breakdown voltage: 500 VAC (50/60 Hz)
• Insulation resistance: 1000 M ohms minimum at 500 V DC

Main Features:

• Sink Type: Digital Output
• Digital Output: Open collector to 40V (200 mA max. load)
• 12 Channels
• I/O Type: Sink Type Output

The ADAM-4053 provides 16 digital input channels for dry contact or wet contact signals. For dry contact, effective distance from DI to contact point is up to 500 m.

Main Features:

• 16 input channels
• Watchdog Timer

The ADAM-4052 provides eight digital input channels: six fully independent isolated channels and two isolated channels with a common ground. All have 5000 V RMS isolation to prevent ground loop effects and prevent damage from power surges on the input lines.

Main Features:

• Six fully independent isolated channels.
• Two isolated channels with common ground
• Isolation voltage: 5000 V RMS

Main Features:

• 12-bit resolution
• Software configurable for mA or V output in individual channels
• 4 digital inputs for latch output
• 3000 VDC D/A to Logic isolation
• Programmable output slope: 0.125 - 128.0 mA/sec. 0.0625 - 64 V/sec.

Analog output module receives its digital input through an RS-485 interface from the host computer. The format of the data is either engineering units, twos complement hexadecimal format or percentage of full-scale range (FSR),depending on the module

Main Features

• 6-channel 2 or 3 wires RTD Input
• Accept Pt100/1000, Balco500, Ni input signals
• Channels configurable for different types of input individually
• Wiring burned-out detectable function
• 3000 VDC A/D to logic isolation

Main Features:

• Up to 192 (96 + 96) TTL digital I/O lines
• Emulates mode 0 of 8255 PPI
• Buffered circuits for higher driving capacity than 8255
• Multiple-source interrupt handling
• Interrupt output pin for simultaneously triggering external devices with the interrupt
• Output status read-back

Main Features:

• PCI bus specification 2.1 compliant
• Speeds up to 921.6 kbps
• 8-port RS-232
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 98/ME/2000/XP, Linux
• Interrupt status register for increased performance
• Powerful and easy-to use utility (ICOM Tools)

Main Features:

• PCI bus specification 2.2
• Speeds up to 921.6 kbps
• 4-port RS-232/422/485
• 16PCI954 UARTs with 128-byte FIFOs standard
• I/O address automatically assigned by PCI Plug & Play
• OS supported: Windows 98/ME/2000/XP, Linux
• Interrupt status register for increased performance
• Space reserved for termination resistors
• Automatic RS-485 data flow control
• Powerful and easy to use utility (ICOM Tools)
• Universal PCI
• 2,500 VDC Surge Protection
• 2,500 VDC Isolation Protection

Main Features:

• Supports 10/100 Mbps communication speeds
• Allows up to 8 clients to access field data simultaneously
• Supports popular HMI software with Modbus/TCP driver or OPC server
• Up to 31 Independent serial ports if configured to RS-485 serial mode
• Provides auto-searching device ID Windows utility
• Surge protection for RS-485 and power line
• Automatic RS-485 data flow control
• Easy mounting on DIN-rail or panel
• Supports Modbus/ASCII, RTU Protocol to control devices