SEMIL-1300: Half Rack Rugged Fanless Computers with M12 Connectors
SEMIL-1300Starting at $2,250.00
- Intel Xeon E or 9th/8th-Gen Core i7/i5/i3 Cpu
- 2U half rack fanless system, -40 to 70C operation
- 4x 802.3at gigabit PoE, VGA, 2x USB 2.0, 2x COM via M12 connectors
- M.2 B key for 4G/5G module, M.2 E key for WiFi module
- Patented superecapacitor based uninterruptible power backup (SEMIL-1311J)
- 8-48V wide range DC input with built in ignition power control
- CE, FCC, and EN 50155 certified
Frequently Asked Questions
The SEMIL-1300 series provides the following interfaces, mostly via robust M12 connectors:
- 4x IEEE 802.3at Gigabit PoE+ ports (25.5W each) - 1 by Intel I219 and 3 by Intel I210 (M12 X-coded)
- Optional 1x 10 GbE port by Intel X550AT controller (M12 X-coded, build option)
- 1x VGA (M12 A-coded, up to 1920x1200) and 1x DisplayPort (up to 4096x2304)
- 2x 3-wire RS-232 ports (COM1 & COM2, M12 A-coded)
- 1x software-programmable RS-232/422/485 port (COM3, DB9)
- 1x RS-232 port (COM4, DB9)
- 3x USB 3.1 Gen1 ports
- 2x USB 2.0 ports (M12 A-coded) plus 1x internal USB 2.0
- 1x 3.5mm audio jack for mic-in and speaker-out
The SEMIL-1300 series accepts 8 to 48V DC input and includes built-in ignition power control for in-vehicle use. Optional AC-DC power adapters are also available: a 160W adapter (20V/8A) and a 120W adapter (20V/6A), both rated for -30 to 70°C operation.
With a 35W CPU, the system operates from -40°C to 70°C. With CPUs of 65W or higher, the range is -40°C to 70°C when configured in 35W TDP mode, or -40°C to 50°C when configured in 65W TDP mode. For Xeon E 2176G/2278GE, i7-9700E, and i7-8700 running at 65W mode, the maximum operating temperature is limited to 50°C, and thermal throttling may occur under sustained full load. Storage temperature range is -40°C to 85°C, with 10%-90% non-condensing humidity. For sub-zero operation, a wide-temperature HDD or SSD is required.
The SEMIL-1300 series is CE and FCC (Class A, per EN 55032 & EN 55035) certified, and is EN 50155 certified for rail applications. It also meets MIL-STD-810G Method 514.7 Category 4 for vibration and Method 516.7 Procedure I for shock.
The system supports up to 64 GB of ECC/non-ECC DDR4-2666/2400 SDRAM across two SODIMM sockets. For storage, it offers 2x internal SATA ports for 2.5" HDD/SSD installation with RAID 0/1 support, 2x full-size mSATA ports (muxed with mini-PCIe), and 1x M.2 2280 M key socket (PCIe Gen3 x4) for NVMe SSD installation.
Yes. The system includes 1x M.2 3042/3052 B key socket for a selected 4G/5G module and 1x M.2 2242/2252 E key socket for a selected WiFi module. It also has 2x full-size mini PCI Express sockets (muxed with mSATA) for further expansion.
SEMIL-1301 is the standard half-rack rugged fanless computer with M12 I/Os. SEMIL-1311J is the same platform but adds Neousys' patented SuperCAP-based UPS with 2500 watt-second stored energy, providing power backup to sustain and safely shut down the system during power outages. SEMIL-1311J is also slightly heavier at 6 kg versus 5.8 kg for the SEMIL-1301.
The SEMIL-1300 measures 220mm (W) x 310mm (D) x 86.5mm (H), excluding the rack-mount bracket, in a standard 2U 19" half-rack form factor. It supports both rack-mounting and wall-mounting, and a joint plate accessory is available to mount two SEMIL units side by side.
The SEMIL-1300 supports Intel Xeon E (2278GE, 2278GEL, 2176G) or 9th/8th-Gen Core i7/i5/i3 processors (LGA1151 socket), paired with the Intel C246 platform controller hub chipset and integrated Intel UHD Graphics 630. It also supports Intel AMT 12.0 and TPM 2.0.
How-to Guides
- Locate the 2x internal SATA ports inside the SEMIL-1300 chassis.
- Install a 2.5" HDD or SSD into an available SATA port.
- For redundancy or performance, configure RAID 0 or RAID 1 using the two SATA ports as supported by the system.
- Identify the correct M.2 socket for your component: the M.2 2280 M key socket (PCIe Gen3 x4) is for NVMe SSDs, the M.2 3042/3052 B key socket is for a selected 4G/5G module, and the M.2 2242/2252 E key socket is for a selected WiFi module.
- Insert the appropriate M.2 module into its matching socket.
- Secure the module according to the socket's standard mounting screw.
- Confirm your power source is within the supported 8 to 48V DC input range.
- Connect the DC input using the M12-Cable-Kit DC power cable, or use an optional PA-160W-OW (20V/8A) or PA-120W-OW (20V/6A) AC-DC power adapter with cord-end terminals for a terminal block.
- The system's built-in ignition power control can be used for in-vehicle power management.
- Choose either 19" rack-mounting or wall-mounting, both of which are supported by the system's mechanical design.
- Attach the appropriate mounting bracket to the chassis (dimensions are 220mm (W) x 310mm (D) x 86.5mm (H) excluding the rack-mount bracket).
- To mount two SEMIL units side by side, use the optional joint-plate accessory.
| Manufacturer | Neousys |
|---|---|
| Processor | i3, i5, i7 8th and 9th Gen, Xeon E |
| Graphics | Intel UHD Graphics 630 |
| Memory | DDR4-2400/2666MHz SDRAM two sockets |
| Chipset | Intel C246 platform controller hub |
| AMT | 12.0 |
| PoE | 4x PoE+ |
| Ethernet Standard | I213, I210 |
| Video Port | 1x VGA, 1 DP |
| Audio | 1x 3.5mm mic in/spk out |
| M.2 | 1x 2242 B key for LTE, 1x 2242 E key for WiFi, 1x 2280 M key for storage |
| Mini PCI-E | 2 |
| mSATA | 2x full mSATA internal |
| 2.5" Drive | 2x SATAIII internal |
| DC Input | 8-48V DC |
| Power Adapter | 120-160W |
| Power Input Voltage | 8-48V DC |
| Power Type | DC |
| Fan | fanless |
| Dimension | 220mm x 310mm x 86.5mm |
| Weight | 5.8/6kg |
| Mounting | rack and wall mount options |
| Operating Temperature | see specifications sheet and manual for configuration related ranges |
| Storage Temperature | -40-85C |
| Humidity | 10-90% non condensing |
| Vibration | MIL-STD810G, Method 514.7, Cat 4 |
| Shock | MIL-STD810G, Method 516.7, Procedure 1 |
| EMC | EN-50115, CE/FCC Class A |
| CPU Cores | 6, 8 |
| CPU Family | Intel Core, Intel Xeon |
| Base CPU Speed | 3.1 to 3.5 GHz, Over 3.5 GHz |
| Video Output | Display Port, VGA |
| PoE Ports | 4 |
| Serial Ports | 3-4 |
| USB 2.0 | 3-4 |
| USB 3.0 | 3-4 |
| Max Memory | 64 GB |
| Operating System | Windows 10, Linux |
| Effective Memory Speed | 2400 MHz, 2666 MHz |
| Form Factor | Fanless |
| Native Storage Type | 2.5" SSD, mSATA Full, M.2 SATA S80 |
| On/Ignition | Built In Ignition Control |