NRU-170-PPC Series: IP66 Waterproof Jetson Edge Panel PCs
NRU-170-PPC SeriesStarting at $2,075.00
- Powered by NVIDIA Orin NX SoM bundled with JetPack
- IP66 waterproof and dustproof
- 10.1” touchscreen with 1920 x 1200 resolution
- 1000 cd/m2 brightness
- 1000:1 high contrast ratio
- -25°C to 60°C fanless operation
- No throttling at 60°C with MAXN TDP
- 4x PoE+ GbE via M12 X-coded connectors
- 1x CAN FD and 1x RS232 via M12 A-coded connectors
- 8V to 35V wide-range DC input with built-in ignition power control
Frequently Asked Questions
Both models share the same 10.1" touch panel, Jetson Orin NX/Nano SoM, dimensions, and DC input. They differ in camera/network connectivity: the NRU-171V-PPC provides 6x waterproof GMSL2 FAKRA Z connectors for automotive cameras (IMX390, ISX031, or IMX490 sensors), plus 1x Gigabit Ethernet port. The NRU-172S-PPC provides 4x PoE+ GbE ports (Intel I350-AM4, 50W total power budget) for IP or industrial GigE cameras, plus 1 additional waterproof GbE port for connecting to an external computer or LiDAR.
Both models include: 2x USB 2.0 ports via M12 A-coded connector, 1x USB Type-C port (under a service door, used for system flashing and OTG), 1x RS-232 port via M12 A-coded connector, 1x CAN FD port via M12 A-coded connector, and 1x isolated GPS PPS input via M12 A-coded connector. The NRU-171V-PPC adds 6x FAKRA Z GMSL2 camera connectors and 1x GbE port. The NRU-172S-PPC adds 4x PoE+ GbE ports plus 1x GbE port (Port 0).
The system accepts 8V to 35V DC input via a 5-pin M12 A-coded connector (IGN/GND/V+), with built-in ignition power control. The required DC input range varies with system load: 8V-35V under 60W load, 12V-35V between 60W-96W load, and 20V-35V between 96W-160W load. Maximum current is 4A per pin. Supplying voltage over 35V will damage the system.
The NRU-170-PPC operates from -25°C to 60°C with passive cooling (MAXN TDP mode), and does not throttle at 60°C under full CPU+GPU load in 25W TDP mode (Orin NX MAXN). Storage temperature is -40°C to 85°C. For sub-zero or over-60°C operation, a wide-temperature HDD or SSD is required. The unit is IP66 rated and certified to CE/FCC Class A (EN 55032 & EN 55035); the NRU-172S-PPC additionally carries EN 50121-3 (EN 50155:2017, Clause 13.4.8). It is also tested to MIL-STD-810H for vibration (Method 514.8, Category 4) and shock (Method 516.8, Procedure I).
The system uses 16GB/8GB LPDDR5 memory on-SOM with the Jetson Orin NX, or 8GB/4GB LPDDR5 with the Jetson Orin Nano (no eMMC). Storage is provided by a pre-installed M.2 2242 M-key NVMe SSD (PCIe Gen3 x1, up to 8Gbps). Expansion includes 1x full-size mini-PCIe socket (PCIe + USB 2.0) for CAN/COM/WiFi modules, and 1x M.2 3042/3052 B-key socket (USB 3.2 Gen1 + USB2.0) with dual micro SIM support for 4G LTE/5G NR modules.
Yes. The mini-PCIe socket accepts off-the-shelf modules such as WiFi or GPS. The M.2 3042/3052 B-key socket, with dual micro SIM slots, supports 4G LTE/5G NR communication modules. Note that SMA antenna installation requires a customized enclosure panel, so if a wireless module is added after initial purchase, you must contact Neousys/an authorized dealer for the compatible panel.
The NRU-170-PPC measures 257 mm (W) x 65 mm (D) x 176 mm (H) and weighs 3.8 kg. It supports standard VESA 75 x 75 mm mounting, with mounting threads located on the heatsink side of the unit.
The system ships with NVIDIA JetPack 5.x pre-installed as a turnkey solution. It can be reflashed with a pre-built system image using a host computer connected via the USB Type-C recovery port, similar to the process used for the Jetson Orin NX Developer Kit.
The NRU-171V-PPC provides 6x waterproof GMSL2 FAKRA Z connectors, supporting multiple configurations: Configuration A - 6x AC-IMX390 (2MP@30FPS); Configuration B - 6x AC-ISX031 (3MP@30FPS); Configuration C - 4x AC-IMX490 (5MP@30FPS). These automotive-grade GMSL2 cameras feature IP67 waterproofing, 120dB HDR, auto white balance, and LED flicker mitigation, and come with pre-integrated drivers.
How-to Guides
- Disassemble the system enclosure to access the mini-PCIe slot.
- Insert the mini-PCIe card at a 45° angle into the slot.
- Secure the card with a screw.
- Clip the IPEX-to-SMA cable onto the module and secure the antenna to the panel (refer to the module's manual for the clip-on connection). Note: a customized enclosure panel with waterproof SMA antenna holes may be needed if installed after initial purchase.
- Reinstall the heatspreader and secure with screws.
- Reinstall the enclosure.
- Disassemble the system enclosure to locate the M.2 3042/3052 B-key slot and dual SIM slots.
- If your module requires a SIM card, push the SIM slot holder to the OPEN position, flip it open, and place the SIM in the slot.
- Flip the holder back over the SIM and push to the LOCK position.
- Insert the M.2 B-key module at a 45° angle and secure it with a screw, using the provided copper standoff (red arrow location for M.2 2242/3042, blue arrow location for M.2 3052).
- Clip the IPEX-to-SMA cable onto the module and secure the antenna to the side panel.
- Remove the protective film on the thermal pad, reinstall the heatspreader, and secure with screws.
- Reinstall the enclosure.
- Confirm the DC source is within 8V to 35V before connecting; supplying over 35V will damage the system.
- Connect the vehicle battery positive line (12V for sedan, 24V for bus/truck) to the V+ pin.
- Connect the vehicle battery negative/GND line to the GND pin.
- Connect the vehicle ACC (accessory) line to the IGN pin.
- Ensure the DC power source and IGN signal share the same ground.
- Connect via the M12 A-coded 5-pin connector (pins: 1=V+, 2=IGN, 3=GND, 4=V+, 5=GND).
- Locate the VESA 75 x 75 mm mounting threads on the heatsink side of the system.
- Attach a VESA-compliant mounting bracket using the threaded holes.
- Secure the system to a sturdy mounting location.
- Remove the screws securing the port cover to access the Type-C port.
- Plug in a USB Type-A/Type-C or Type-C to Type-C cable connecting the system to a host machine.
- Put the system into recovery mode and reflash using the pre-built system image following Neousys' reflash procedure.
- After reflashing, disconnect the Type-C cable.
- Secure the port cover in the specific orientation shown, using screws torqued to 2.7-3.3 kgf, to maintain IP66 waterproofing.
The NRU-170-PPC series is an IP66-rated, 10.1” AI panel PC powered by NVIDIA Jetson Orin NX or Orin Nano, delivering up to 100 TOPS of AI processing capability. This series is tailored for edge AI applications that demand water resistance and human-machine interaction, including ADAS for off-highway vehicles, autonomous marine vessels, AI-driven inspection in food processing, smart livestock management, and precision agriculture.
Leveraging the NVIDIA Jetson Orin NX, the NRU-170-PPC achieves superior AI inference, offering up to 100 sparse TOPS (INT8) and the ability to transcode up to 18 simultaneous 1080P video streams. The series also incorporates waterproof features at a competitive price point, accomplished through a refined mechanical design, carefully selected waterproof connectors, and standardized cable kits. For adaptability in various semi-outdoor environments, the unit is equipped with a 10.1” touch panel boasting 1000 cd/m² brightness and a 1000:1 contrast ratio, with the added functionality of single-finger touch sensitivity in wet conditions.
The NRU-170-PPC series includes two models: the NRU-171V-PPC, supporting up to six GMSL2 automotive cameras with pre-integrated drivers for select cameras utilizing IMX390, ISX031, and IMX490 CMOS sensors, and the NRU-172S-PPC, which offers four PoE+ GbE ports for IP or industrial GigE cameras. A waterproof GbE port is also provided for interfacing with external computers or LiDAR. The NRU-170-PPC is designed as a compact, all-in-one edge AI platform that simplifies in-vehicle cabling. It supports an 8V to 35V wide-range DC input, ignition power control, a CAN FD bus port, and an RS232 port. Expansion options include a mini-PCIe socket for CAN/ COM/ WiFi modules and an M.2 B-key socket for 4G LTE/ 5G NR communication modules.
By integrating a 10.1” touch panel, IP66 rating, Orin NX AI performance, and comprehensive onboard camera connectivity, the NRU-170-PPC strikes an optimal balance between ruggedness, performance, cost efficiency, and ease of deployment. It represents a cutting-edge edge AI solution for applications in smart agriculture, mining, construction, smart animal husbandry, edge inspection, and outdoor autonomous mobile robots (AMRs).
| Manufacturer | Neousys |
|---|---|
| Short Description | The NRU-170-PPC series is an IP66-rated, 10.1” AI panel PC powered by NVIDIA Jetson Orin NX or Orin Nano, delivering up to 100 TOPS of AI processing capability. This series is tailored for edge AI applications that demand water resistance and human-machine interaction, including ADAS for off-highway vehicles, autonomous marine vessels, AI-driven inspection in food processing, smart livestock management, and precision agriculture. |
| Processor | NVIDIA Jetson Orin NX system-on-module (SOM) |
| Graphics | NVIDIA Ampere GPU |
| Memory | 16GB LPDDR5 @ 3200 MHz on SOM |
| PoE | IEEE 802.3at PoE+ PSE for Port 1 to Port 4 with 50W total power budget |
| DIO | 1x isolated GPS PPS input via M12 A-coded 8-pin connector |
| M.2 | Wide-temperature 2TB M.2 NVMe SSD |
| DC Input | 8V to 35V DC input and ignition power control via M12 A-coded, 5-pin connector (IGN/ GND/ V+)1 1The required DC input range is 8V to 35V when the system load is under 60W. The required DC input range is 12V to 35V when the system load is between 60W to 96W. The required DC input range is 20V to 35V when the system load is between 96W to 160W. |
| Power Adapter | 160W AC/DC 20V/8A, 18AWGx4C/120cm, cord end terminals for terminal block |
| Dimension | 257 mm (W) x 65 mm (D) x 176 mm (H) |
| Weight | 3.8 kg |
| Mounting | VESA 75 mount (standard) |
| Operating Temperature | -25°C to 60°C with passive cooling (MAXN TDP mode)2 With full CPU+GPU stressing: NRU-170-PPC non-throttling at 60°C with 25W TDP mode (Orin NX MAXN) 2For sub-zero and over 60°C operating temperature, a wide temperature HDD or Solid State Disk (SSD) is required. |
| Storage Temperature | -40°C to 85°C |
| Humidity | 10% to 90%, non-condensing |
| Vibration | MIL-STD-810H, Method 514.8, Category 4 |
| Shock | MIL-STD-810H, Method 516.8, Procedure I |
| EMC | CE/ FCC Class A, according to EN 55032 & EN 55035 EN 50121-3 (EN 50155:2017, Clause 13.4.8) |
| Luminance | 1000 cd/m² |
| Contrast Ratio | 1000:1 |
| Display Size | 10.1" |
| Max Resolution | 1920x1200 |
| Touchscreen Interface | Single-finger touch functionality when the screen is wet with optical bonding, AG (Anti-Glare), and AF (Anti-Fingerprint) glass treatment. |