CoastIPC provides a full range of industrial data acquisition (DAQ) and control products which are widely used in industrial applications such as facility monitoring,environmental monitoring and industrial process control.
Data Acquisition & Communication
Data Acquisition and Control
CoastIPC carries several types of industrial data acquisition and control products, including PCI cards, converters, repeaters, LED controllers, I/O modules, IoT IP nodes, industrial switches, and power relay modules from companies such as Advantech and Neousys Technology.
We can help you find the right product for your application, whether it involves facility monitoring, environmental monitoring, or industrial process controls. Contact us today to learn more about our data acquisition and control products.
8-ch Isolated AI EtherNet/IP Module
ADAM-6117EI-AEMain Features:
- EtherNet/IP protocol
- High common mode voltage 200 VDC
- Isolation Protection: 2,500 VDC
- 2 x RJ-45 LAN (daisy chain)
6 DO/6 DI Power Relay Module
ADAM-6066-DMain Features:
- 6-ch DI, 6-ch RL, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
6 Relay Output/6 DI Module
ADAM-6060-DMain Features:
- 6-ch DI, 6-ch RL, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
16-Ch Source Type DI/O Module
ADAM-6052-DMain Features:
- 8-ch DI, 8-ch DO, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
16-Ch Isolated DI/O w/Counter Module
ADAM-6051-DMain Features:
- 12-ch DI, 2-ch DO, 2-ch counter, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
18-Ch Isolated DI/O Module
ADAM-6050-DMain Features:
- 12-ch DI, 6-ch DO, Ethernet-based smart I/O
- Remote monitoring and control with mobile devices
- Group configuration capability for multiple module setup
- Flexible user-defined Modbus address
- Intelligent control ability by Peer-to-Peer and GCL function
- Active I/O message by data stream or event trigger function
- Multiple protocol support: Modbus TCP, TCP/IP, UDP, HTTP, DHCP
- Web language support: XML, HTML 5, Java Script
Ethernet-based Dual-loop PID Controller
ADAM-6022-A1EMain Features
- 2 loop PID control algorithms built in one package
- 3 analog input/1 analog output/1 digital input/1digital alarm output for 1 PID loop
- Support multiple analog I/O ranges: 0 ~ 10 VDC, 0 ~ 20 mA and 4 ~ 20 mA
- Support heating/cooling (direct/reverse) action mode
- Support loop open/close (PID disable/enable) and analog output manual control modes
- Built-in watchdog timer
8-Ch AI/DO Module
ADAM-6017-DMain Features:
- 10/100 Mbps communication rate
- I/O type: 8 AI / 2 DO
- Input type: mV, V, mA
- ProvideDefault/customized web page
- Provides math. Functions: Max., Min., Avg.
7-Ch RTD Input Module
ADAM-6015-DEMain Features:
- I/O Type: 7 RTD
- 10/100Based-T Ethernet
- Supports multi-channel/multi-range
- Pt 100/1000, Ni, Balco 500
- Wiring burn-out detect function
1-port RS-232 Serial Device Server
ADAM-4571L-DE
Main Features:- Supports RS-232 serial communication
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM) mode
- Allows a max. of 5 hosts to access one serial port
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Supports remote update firmware
1-port RS-232/422/485 Serial Device Ser
ADAM-4571-CE
Main Features:- Supports RS-232/422/485 serial communication
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM), TCP and UDP operation modes
- Allows a max. of 5 hosts to access one serial port
- Allows a max. of 16 hosts to be accessed as TCP client mode
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Automatic RS-485 data flow control
- Supports remote update firmware
2-port RS-232 Serial Device Server
ADAM-4570L-DEMain Features:
- Supports RS-232 serial communication
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM) mode
- Allows a max. of 5 hosts to access one serial port
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Supports remote update firmware
2-port RS-232/422/485 Serial Device Ser
ADAM-4570-CEMain Features:
- Supports RS-232/422/485 serial communications
- Provides 10/100 Mbps auto-sensing Ethernet port
- Supports baud rate up to 921.6 kbps
- Provides COM port redirection (Virtual COM), TCP and UDP operation modes
- Allows a max. of 5 hosts to access one serial port
- Allows a max. of 16 hosts to be accessed as TCP client mode
- Supports auto re-connection function
- Supports Windows 2000/XP/Vista drivers
- Built-in 15 KV ESD protection for all serial signals
- Automatic RS-485 data flow control
- Supports remote update firmware
Learn More1 port isolated USB to RS232 converter
ADAM-4562-AEADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you dont need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices. Compliant with USB V1.1, ADAM-4561/4562 features several powerful functions such as high-speed 115.2 kbps transmission, support for various operating systems, independentRS-232/422/485 ports and more. By simply plugging in a USB hub, ADAM-4561/4562 eliminates the configuration issues associated with high-priced, older card solutions. You only have to install the drivers, no need to set cards slots, IRQ addresses, DMA channels, or device addresses. This reduces programming effort.
Main Features:
- Full compliance with USB V1.1 specifications
- Transmission speed up to 115.2 kbps
- Isolation protection 3000 VDC provided
- Automatic RS-485 data flow control
- No external power supply necessary; the hub derives its power from the USB port
- Plug & Play installation
- No additional IRQs or I/O ports required
- Hot swap function supported
1-port Isolated USB to RS-232/422/485
ADAM-4561-CEADAM-4561/4562 allows PC users to connect a serial device to a system that use a USB interface. To attach the ADAM-4561/4562 to a PC, you don't need to open the chassis or power down your PC. Instantly get one or two extra high-speed RS-232/422/485 ports. The power is derived from the USB port, so there are no power adapters to deal with. This makes the ADAM-4561/4562 especially suitable for modems, printers, POS systems and industrial control devices.
Main Features:
- Full compliance with USB V1.1 specifications
- RS-232/422/485 port supported
- Transmission speed up to 115.2 kbps
- Isolation protection 3000 VDC provided
- Automatic RS-485 data flow control
- No external power supply necessary; the hub derives its power from the USB port
- Plug & Play installation
- No additional IRQs or I/O ports required
- Hot swap function supported
Â
Learn MoreFiber Optic to RS-232/422/485 Converter
ADAM-4542+-BE- Easily mounted on a DIN-rail, panel or piggyback
- Transmission speeds of up to 115.2 kbps
- Half/Full-duplex, bidirectional transmission mode
- Avoids lightning strikes and EMI/RFI interference
- Prevents damage from electrostatic discharge
- Stable and error-free data transmission
- Automatic internal RS-485 bus supervision
- No external flow control signals required for RS-485
- Transient suppression and over-current protection on RS-422/485 data lines
- Reserved space for termination resistors
- LED for power and data flow indication
- Power requirement: +10 to + 30 VDC
Â
Learn MoreAdvantech Multi-mode Fiber Optic to RS-232/422/485 Converter
ADAM-4541-BEMain Features:
- Easily mounted on a DIN-rail, panel or piggyback
- Transmission speeds of up to 115.2 kbps
- Optical fibers enable transmission of 2.5 km (measured with 62.5/125 mm)
- Half/Full-duplex, bidirectional transmission mode
- Avoids lightning strikes and EMI/RFI interference
- Prevents damage from electrostatic discharge
- Stable and error-free data transmission
- Automatic internal RS-485 bus supervision
- No external flow control signals required for RS-485
- Transient suppression and over-current protection on RS-422/485 data lines
- Reserved space for termination resistors
- LED for power and data flow indication
- Power requirement: +10 to + 30 VDC
Advantech Robust 15-ch Digital I/O Module with Modbus
ADAM-4510-EEMain Features:
- 7 input channels and 8 output channels
- Broader Operating Temperature Range
- Higher Noise Immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
- Broader Power Input Range: +10 ~ +48 VDC
- LED display allows to monitor the status address settings
- Digital Filter Function
- DI channels can be used as 1 kVGz counters
- Over current/ short circuit protection
- DO channels support pulse output function
The ADAM-4100 series modules are compact, versatile sensor-to-computer interface units designed for reliable operation in harsh environments. Their built-in microprocessors, encased in rugged industrial-grade ABS plastic, independently provide intelligent signal conditioning, analog I/O, digital I/O, LED data display, and an address mode with a user-friendly design for convenient address reading.
Â
Learn MoreAdvantech ADAM-4017 Robust 8-ch Analog Input Module with Modbus
ADAM-4017-D2EMain Features
- 8 differential and independent configuration channels
- Broader operating temperature range
- Higher noise immunity: 1 kV surge protection on power inputs, 3 kV EFT, and 8 kV ESD protection
- Broader power input range: 10 ~ 48VDC
- LED display allows to monitor the status address settings
- Supports 200 VDC high common mode voltage
- Supports unipolar and bipolar input
- Supports +/- 15 V input range
- Supports filter auto-turning or filter-out 50 Hz / 60 Hz
- Online firmware update
4-Slot IO Expansion, Cortex-A8 Wireless
ADAM-3600-C2GL1A1EMain Features:
- High Performance CPU Cortex A8 600MHz
- Low Power DDR3L 256MB RAM
- Embedded Real-time Linux Kernel
- Domain Focused Onboard IO -8AI / 8DI / 4DO
- 4-Slot I/O Expansion
- High I/O Flexibility with 4-slot I/O Expansion
- Multiple wireless options for Zigbee/ Wi-Fi/ 3G/ 4G/ GPRS
- IEC61131-3&C Programming Language
- Modbus & DNP3 Protocol
- Operation Temperature -40°C ~ 70°C
5-port USB 2.0 Hub
USB-4622-CEUSB-4622 is a USB 2.0 hub capable of connecting at most 5 USB salve modules. It supports the USB 2.0 high-speed mode that can achieve 480Mbps data transmitting rate, realizing the USB-4700 series' high performance for heavy-loaded applications. The unique lockable cable design secures the slave module connections, preventing the cable from being unplugged accidentally.
Main Features:- 5 downstream USB 2.0 ports
- Compatible with USB 2.0 High-speed, USB 2.0 Full-speed, USB 1.0
- 480 Mbps high-speed data transfer
- LED indicator
- Suitable for DIN-rail mounting
- One lockable USB cable included
- 10 ~ 30 VDC power input (power adapter not included*)
Learn More5-port Isolated USB 2.0 Hub
USB-4620-AEWith 5 USB 2.0 ports, USB-4620 enhances its isolation protection to 3,000 VDC for each downstream port, making every USB device connected with USB-4620 could operate independently and safely. Designed for industrial applications, USB-4620 is able to be mounted through several types, such as DIN-rail mounting, wall mount, and VESA mount. Other than that, USB-4620 is equipped with lockable USB connectors and screw holes, allowing each device to be connected firmly with USB-4620. Though the standard USB cable is made for easy plugging and removing, it is critical to have reliable connections while operating for automation control and online production applications.
Main Features:- 5 downstream USB 2.0 ports
- Compatible with USB 2.0 Full-speed
- 3,000 VDC voltage isolation for each downstream port
- Suitable for DIN-rail mounting
- One lockable USB cable included
- 10 ~ 30 VDC power input (power adapter not included*)
Â
Learn More6-ch Relay EtherNet/IP Module
ADAM-6160EI-AEMain Features:
- EtherNet/IP protocol
- 6-ch Form C relay output
- Breakdown voltage: 500 VAC (50/60 Hz)
- 2 x RJ-45 LAN (daisy chain)
- Contact Rating: 5 A @ 250 VAC; 5 A @ 30 VDC
15-ch Isolated DI/O EtherNet/IP Module
ADAM-6150EI-AE- EtherNet/IP protocol
- 8-ch digital input and 7-ch digital output (sink)
- Normal output current: 0.1 A (per channel)
- 2 x RJ-45 LAN (daisy chain)